Primo water dispensers have become a popular choice for many households as they provide clean drinking water at a low cost. However, like any other appliance, they require regular maintenance to function efficiently and hygienically. One such component that you need to inspect and clean on a regular basis is the probe, which helps to dispense the water.
In this step-by-step guide, we will walk you through the process of cleaning your Primo water dispenser probe. By following these instructions, you will not only ensure that your appliance is free from germs and harmful bacteria but also prolong its lifespan. So, let’s get started!
Gather Your Supplies
Gathering your supplies is important before you start cleaning your Primo water dispenser probe. You will need a few items to make the cleaning process easier and keep the probe in good condition. First, you will need a small gentle cleaning brush that can clean hard-to-reach areas of the probe. You can also use a soft cloth or sponge for this purpose.
Next, you will need a disinfectant cleaning solution that is approved for use on surfaces that come into contact with drinking water. You can either purchase a commercial cleaning solution or make your own using household items like vinegar or bleach.
Lastly, you will need a clean towel or cloth to dry the probe thoroughly after cleaning. With these supplies in hand, you can start cleaning your Primo water dispenser probe with confidence, knowing that you have everything needed to get the job done correctly and keep your drinking water safe.
Disconnect the Dispenser
Disconnect the Dispenser:
Before you begin the cleaning process of your Primo Water Dispenser, make sure to unplug it from the electrical outlet. This will ensure your safety and give you easy access to the dispenser probe. The next step is to detach the water bottle by twisting it and lifting it off the dispenser base. This will allow you to maneuver the dispenser, giving you a clear view of its components.
After removing the water bottle, you can now proceed to disconnect the dispenser, which involves turning off the hot and cold switches located on the rear panel of the dispenser. This will ensure no water flows through the machine while you are cleaning it. Once the switches have been turned off, unplug the dispenser from the electrical outlet, and you are now ready to proceed with the cleaning process. Disconnecting the dispenser from the electrical outlet is crucial as it ensures your safety during the cleaning process. It also prevents any electrical damage to the machine, making it last longer.
You may also like: How to Clean Water Dispenser on GE Fridge: A Step-by-Step Guide
Remove the Probe Cover
The probe cover of your Primo water dispenser should be removed before cleaning the probe. Before removing the probe cover, make sure that your hands are clean and dry to avoid contamination.
To remove the probe cover, locate the cover at the bottom of the dispenser and grasp it firmly. Gently pull the cover away from the probe to remove it. Be careful not to damage the probe or the cover during the removal process. Once the cover is removed, you can proceed with cleaning the probe using a soft cloth or sponge with mild soap and water solution. Remember to rinse the probe thoroughly with clean water before using it again.
Clean the Probe
Cleaning the probe of your Primo water dispenser is an important step in keeping your water sanitized. The probe is responsible for dispensing water, which makes it a hotbed for bacteria and other germs. To clean your dispenser’s probe, you will need to turn off the power and take out the water bottle.
Firstly, you should use a cloth to wipe down the probe gently. After that, use a cotton swab dipped in a mixture of warm water and vinegar to clean the inside of the probe. Dip the cotton swab into the mixture, squeeze out the excess, and gently clean the inside of the dispenser’s probe. Be sure to use a fresh cotton swab for each use. Once you’ve finished, use another cloth to dry off the probe. Remember to sanitize the probe regularly to avoid bacteria buildup and maintain the quality of your water.
Related Post: How to Fix My Water Dispenser: A Guide to Troubleshooting and Repairing Common Issues
Reinstall the Probe Cover
After cleaning your Primo water dispenser’s probe, the next step is to reinstall the probe cover. This cover is essential as it helps to keep the probe clean and free from contamination. You need to ensure that the cover is secured tightly in place, so it does not fall off or become loose.
To reinstall the probe cover, place the cover over the probe and align it correctly. Apply pressure on the cover until you hear a clicking sound. You can do this by pressing down on the cover with your fingers or using a tool like a flathead screwdriver. Ensure that the cover is aligned as evenly as possible to avoid it becoming warped or misshapen. Once you have reinstalled the probe cover, your Primo water dispenser is now ready to dispense clean and refreshing water.
Reconnect the Dispenser
After completing the cleaning process, the dispenser needs to be reconnected to start the system again. This is a crucial step that cannot be neglected as even a small error can result in malfunctioning of the dispenser. Before reconnecting, make sure that you have turned on the power supply and the dispenser is completely dry.
To reconnect the dispenser, simply align the probe with the opening in the bottle support ring and carefully insert it. You will hear a click sound when the probe is securely in place. Once the probe is connected, attach the drip tray, and you are good to go. After reconnecting, check the dispenser by dispensing some water to ensure it is working properly. By following these simple steps, your Primo water dispenser’s probe will be cleaned and reconnected in no time, providing you with clean, crisp water anytime you wish to quench your thirst.
Read Also: Best Bottled Water Dispensers for Your Home or Office
Test the Dispenser
After following all the necessary steps to clean your Primo water dispenser probe, it’s crucial to test the dispenser to ensure it’s working correctly. To do so, first, fill the water tank with fresh water and allow it to run through the system for a few minutes before dispensing any water.
Next, use a clean container to collect water from the dispenser. Check the water’s clarity, taste, and odor to see if it’s safe for consumption. If the water’s quality meets your expectations, congrats! Your Primo water dispenser is ready to use again. However, if you detect any unusual smell, taste, or cloudiness, run more water through the system to flush out any remaining contaminants. You can also try running vinegar or lemon water through the dispenser for an additional rinse cycle. By following this simple step, you can ensure that your Primo water dispenser provides you with clean and fresh water every time.
Final Thoughts
To sum up, cleaning the Primo water dispenser probe is a simple task that should be done on a regular basis to ensure the water quality remains high and the dispenser functions efficiently. The entire process can be completed in just a few minutes using basic cleaning supplies that are easily available at home.
It is important to note that while cleaning the probe, one should always follow the manufacturer’s instructions to avoid any damage to the dispenser. By taking care of your Primo water dispenser probe, you can enjoy the benefits of clean and refreshing water at all times. So, keep your dispenser clean and hygienic with regular maintenance and enjoy the convenience of having fresh water at your fingertips.
Further Reading: How Much Is a Culligan Water Dispenser? A Guide to Pricing and Features.