Installing a strainer in your sink is an easy way to prevent food particles and other debris from clogging your drain. A strainer allows water to flow freely while trapping the debris, making it an affordable and efficient solution to keep your sink clean and tidy. However, some people find installing a strainer difficult and end up calling in a plumber, which can be costly.
But fear not, installing a strainer in your sink can be done by anyone, even with little to no plumbing experience. In this article, we’ll guide you through a step-by-step process to easily install a strainer in your sink, making sure your drainage is always efficient and hassle-free.
Gather the Necessary Materials and Tools
Installing a strainer in your sink is a great way to prevent clogs and improve drainage efficiency. To do this, you will need to gather the necessary materials and tools. Here is a list of everything you will need to get started:
Materials:
– Strainer (available at hardware or home improvement stores)
– Plumbers putty or silicone caulk (optional)
Tools:
– Wrench or pliers
– Screwdriver (may not be necessary depending on the type of strainer)
– Bucket or container (to catch any water that may spill during the installation process)
Before you begin, make sure you have all of the supplies listed above. Additionally, choose a time when you can work on the installation without interruptions. The installation process may take anywhere from 15 minutes to an hour depending on the condition of your sink and the type of strainer you choose to install.
Prepare Your Sink for Strainer Installation
Before installing a strainer in your sink, it’s important to prepare your sink and ensure that it’s clean and free from any obstructions. Start by removing any debris or food particles that may have accumulated in the drain. You can use a plunger or a drain cleaner to thoroughly unclog the drain.
Once the drain is clear, clean the sink thoroughly using a mild detergent and warm water. Pay attention to the area around the drain as this is where the strainer will be installed. Remove any hard water stains or mineral buildup using an appropriate cleaning agent. After cleaning, rinse the sink with water and dry it with a clean towel. Preparing your sink beforehand will ensure that your new strainer fits securely, providing efficient drainage for all your kitchen chores.
You may also like: How to Easily Remove a Sink Strainer Nut: Step-by-Step Guide
Install the Strainer from Above or Below
Once you have chosen a strainer that fits your sink’s drain size, it’s time to install it. There are two ways to install the strainer – from above or below. The method you choose depends on your preference and the design of your sink.
To install the strainer from above, start by placing the rubber gasket around the strainer’s base. Then position the strainer over the sink drain and push it down firmly to secure it in place. Once in place, tighten the locknut with a wrench to create a tight seal. This method is suitable for sinks with a flat bottom and no overflow.
If your sink has an overflow or a curved bottom, you may need to install the strainer from below. Begin by placing the rubber gasket around the underside of the sink drain. Insert the strainer into the drain and push it up through the sink. Tighten the locknut on the strainer’s underside with a wrench to create a secure seal. This method ensures that the strainer sits flush with the sink’s surface, allowing water to drain efficiently.
Tighten the Locknut to Secure the Strainer in Place
After placing the strainer into the sink opening, you need to secure it in place to ensure that it fits snugly. You can do this by tightening the locknut underneath the sink. However, you might need the help of an adjustable wrench to do this step correctly.
First, reach under the sink and locate the locknut that is holding the strainer in place. Use the adjustable wrench to turn the locknut clockwise until it is tight, but be careful not to over-tighten it. Over-tightening can cause the strainer to crack or damage the sink. Once the locknut is securely tightened, run some water into the sink to check that the strainer is in place and efficient in draining water.
Related Post: How to Easily Change a Kitchen Sink Strainer in 5 Simple Steps
Test the Drainage Performance of Your New Strainer
After installing the new strainer in your sink, it is important to test its drainage performance to ensure efficient water flow and prevent clogging. To do this, run water in the sink and watch how it drains through the strainer. Check for any signs of slow drainage or water backing up.
If you notice any issues, it may be necessary to adjust the strainer or clean out any debris that may have accumulated in the drain. You can also test the strainer’s ability to catch debris by placing some small food particles or hair in the sink and running water. If the strainer catches the debris, it is working effectively in preventing clogs. By testing the drainage performance of your new strainer, you can ensure that it is functioning properly and will provide long-lasting and efficient drainage for your sink.
Troubleshoot Any Issues with Drainage and Strainer Functionality
Even if you follow all the steps carefully, there may still be occasional issues with your sink strainer and drainage. Here are a few troubleshooting tips to help ensure peak functionality.
First, if your sink is draining slowly, it may be due to a clog in the pipes, rather than a problem with the strainer. Try using a plunger or drain snake to clear the blockage. If the issue persists, you may need to call a plumber for further assistance.
Secondly, if you notice that your strainer is not catching all of the debris that goes down the drain, it may have become misaligned or loose. Check that the strainer is properly seated and tightened in place. If necessary, remove the strainer and clean it to ensure that it is free from any debris or buildup that may be obstructing its functionality. By following these simple steps, you can keep your sink strainer and drainage working efficiently for years to come.
Read Also: How to Install a Blanco Sink Strainer in 5 Simple Steps
Maintain and Clean Your Strainer for Long-Term Use and Efficiency
Once you have installed your strainer, it is crucial to maintain and clean it properly to ensure it functions correctly over a long period. One way to clean it is by removing any food particles and rinsing it thoroughly with warm water. You can also use a brush or sponge to clean the strainer while it is still attached to the sink. Be careful not to use abrasive cleaning materials that may scratch and damage the strainer.
It is advisable to clean your strainer regularly to prevent clogging and buildup of bacteria, which can lead to unpleasant odours in your kitchen. You can also disinfect your strainer by soaking it in a mixture of vinegar and water for about 30 minutes. After cleaning, ensure the strainer is dry before placing it back in the sink. Regular maintenance and cleaning of your strainer will ensure efficient drainage and prolong its lifespan.
Final Verdict
Now that you have learned how to put a strainer in a sink, you can prevent clogs and keep your drain functioning properly. Remember to choose the right size and style of strainer for your sink and the type of debris you want to filter out. Additionally, regularly cleaning your strainer will help keep it working effectively.
Overall, putting a strainer in your sink is an easy and cost-effective way to avoid the hassle of clogged drains. By following the simple steps outlined in this article, you can maintain the cleanliness and functionality of your sink for years to come. Happy straining!
Further Reading: How to Easily Install a New Sink Strainer in Your Kitchen Sink