Soap dispensers offer an easy and convenient way to wash hands in any setting. Whether you’re in your home bathroom, kitchen, or public restroom, having a soap dispenser within reach is important for maintaining sanitation. While many soap dispensers are designed to be placed on a countertop, wall-mounted dispensers offer a space-saving and efficient solution. In this article, we will provide you with a step-by-step guide on how to mount a soap dispenser on the wall in your bathroom or kitchen.
Installing a soap dispenser on the wall requires a bit of patience and some basic tools. However, it’s a simple and satisfying DIY project that can be completed in just a few hours. Once you’ve mounted your soap dispenser, you’ll enjoy a clutter-free and easily accessible accessory that will make handwashing more effortless and hygienic. In the following sections, we’ll walk you through each step of the process and provide you with tips and tricks to make the installation process a breeze.
Gathering the Required Tools and Materials
Before you begin mounting a soap dispenser, it is essential to gather all the required tools and materials to ensure a smooth and successful installation. Here is a list of the necessary items you will need:
The materials you require depend on the type of soap dispenser you have. For most wall-mounted soap dispensers, you will need: wall anchors, screws, and a mounting bracket for the dispenser. You will also need a drill, drill bits, level, screwdriver, and measuring tape. Some dispensers also come with templates or instructions, which can be extremely useful during the process.
Ensure you have all the items listed before beginning the installation process to avoid any interruptions and ensure a hassle-free experience. It is also essential to read the manufacturer’s instructions carefully to avoid installation errors and ensure you put the dispenser up correctly. With the right materials and tools, mounting a soap dispenser on the wall can be straightforward and done in no time.
Measuring and Prepping the Wall Surface
Before you begin mounting your soap dispenser on the wall, it’s important to measure and prepare the wall surface. This helps ensure that the dispenser is installed at the accurate height and is securely attached to the wall.
To start, locate the area on the wall where you want to install the soap dispenser and measure the distance from the floor to the desired height of the dispenser. This will help you determine the correct position to mount the dispenser. Once you’ve determined the placement, use a stud finder to locate the studs in the wall and mark their location. If you can’t locate studs, it’s important to use anchors and screws that can support the weight of the soap dispenser. Next, clean the area of the wall where the dispenser will be mounted to ensure a secure grip. Once everything is prepped, you’re ready to move on to the next step in the installation process.
You may also like: How to Effortlessly Use the Simplehuman Soap Dispenser for a Sparkling Clean Finish
Installing the Mounting Bracket for the Soap Dispenser
Installing the mounting bracket for the soap dispenser is a crucial step in the process of mounting a soap dispenser on the wall. The mounting bracket is what supports the soap dispenser and ensures it stays securely in place. When installing the mounting bracket, the first step is to determine where on the wall the soap dispenser will be placed. Once you have determined the location, use a level to make sure the mounting bracket will be completely horizontal.
Next, you will need to use a stud finder to locate the studs behind the wall. It is important to mount the bracket onto a stud to ensure it can hold the weight of the soap dispenser. Once you have located the studs, mark the spots with a pencil. Then, use screws and a drill to attach the mounting bracket to the wall. Be sure to tighten the screws securely so that the bracket is firmly in place and won’t move or shift once the dispenser is attached. With the mounting bracket securely in place, you are now ready to attach the soap dispenser to the bracket.
Connecting the Soap Dispenser to Plumbing Lines
Connecting the Soap Dispenser to Plumbing Lines:
Before connecting the soap dispenser to the plumbing lines, first, identify the type of plumbing line you have. Most modern homes have standard ½ inch PVC or copper pipes, but if your home is older, you may have galvanized or steel pipes, which require different connectors.
Once you have identified the plumbing lines, you will need to connect them to the soap dispenser using a supply tube. The supply tube should be long enough to reach your plumbing lines, but not so long that it will interfere with the soap dispenser’s mounting. Apply plumber’s tape or thread sealant to the threads on the plumbing lines and the soap dispenser’s connections to ensure a tight seal. Finally, tighten the connections with a wrench, but be careful not to over-tighten and damage the connections. Once the supply tube is connected, you can turn on the water to ensure there are no leaks.
Related Post: Best Hand Free Soap Dispensers: Touchless and Convenient.
Attaching the Soap Dispenser to Mounting Bracket
Attaching the Soap Dispenser to Mounting Bracket:
Once you have drilled the holes and installed the mounting bracket, it is time to attach the soap dispenser to it. Firstly, you need to slide the dispenser over the bracket’s mounting plate until it clicks in place. Make sure that the dispenser is securely attached to the bracket and there is no wobble.
Next, you need to tighten the screws on the bracket that secure the dispenser in place. Begin by tightening the bottom screw and then the top for maximum stability. Use a screwdriver to tighten the screws, making sure they are secure but not overly tight. Finally, fill the dispenser with soap and test it by pressing the pump to dispense the soap. Your soap dispenser is now mounted securely on the wall and ready to serve its purpose.
Testing the Soap Dispenser for Proper Operation
After mounting the soap dispenser on the wall, it is essential to test its proper operation. Start by filling the dispenser with soap and ensure that the soap is flowing freely from the dispenser. If there is any resistance, it may be due to clogged pipes or a dispenser that is not correctly installed.
Next, activate the dispenser by pressing the button or handle to check if the soap is dispensing correctly. If the soap does not come out, check for any malfunction in the dispenser. It is essential to test the soap dispenser several times to ensure that it is working correctly. Once you have confirmed that the soap dispenser is functioning correctly, it is ready for use. Remember to refill the dispenser whenever it’s empty.
Read Also: How to Refill a Kimberly Clark Soap Dispenser: A Simple Step-by-Step Guide
Caution and Maintenance Guidelines for Wall-Mounted Soap Dispensers
Caution and Maintenance Guidelines for Wall-Mounted Soap Dispensers
While wall-mounted soap dispensers are a convenient way to keep your hands clean, it is essential to take proper care of them to maintain their functionality. Here are a few caution and maintenance guidelines that you should follow to keep your soap dispenser in good condition.
Firstly, ensure that the dispenser is firmly mounted on the wall. It should be tight enough to prevent it from wobbling or coming loose, which could cause it to fall and break. Additionally, clean the dispenser regularly with warm water and a mild detergent. Avoid using harsh cleaners or abrasive materials that could scratch or damage the dispenser’s surface. By following these caution and maintenance guidelines, you can enjoy using your wall-mounted soap dispenser for an extended period.
Final Verdict
In today’s fast-paced world, every little time-saving hack counts. One such hack is mounting your soap dispenser on the wall. Not only does it free up counter space, it also adds a touch of elegance to your bathroom or kitchen. With the step-by-step guide provided above, you can easily mount your soap dispenser on the wall in no time at all.
Remember to take the necessary precautions and invest in high-quality materials to ensure that your soap dispenser stays securely mounted for years to come. With a little effort and attention to detail, you can enjoy the benefits of a wall-mounted soap dispenser in your home today. Start the process now and transform the way you experience handwashing!
Further Reading: How to Open a Purell Hand Soap Dispenser – A Step-by-Step Guide