If you’re unfamiliar with Gojo soap dispensers, you’re missing out on one of the most popular hand hygiene products on the market. This brand produces a variety of efficient and effective soap dispensers that are often used in medical facilities, schools, and offices.
Despite their popularity, many people struggle to remove Gojo soap dispensers when it’s time to refill or replace them. Luckily, it’s an easy process that doesn’t require any special equipment or experience. In this article, we’re going to walk you through the steps it takes to remove a Gojo soap dispenser from its mount. Whether you’re a facilities manager or just curious how to replace the soap in your own restroom, this step-by-step guide will make the process a breeze.
Gather the Necessary Tools and Materials
Gathering the necessary tools and materials is the first step towards successfully removing a Gojo soap dispenser. Before diving into the task, it’s important to ensure that you have all the essential items required for the job. These tools and materials are readily available in any household and can be easily found in a nearby hardware store.
To remove a Gojo soap dispenser, you’ll need a screwdriver, pliers, a putty knife, and some cleaning rags. Additionally, we recommend using rubber gloves to protect your hands during the removal process. You’ll also need a sealant remover or alcohol, which will help remove any excess adhesive residue from the wall or surface where the dispenser was installed.
Once you have gathered all the materials mentioned above, you’ll be ready to start the removal process smoothly. Make sure you have everything you need before you start removing the dispenser to avoid making unnecessary trips to the store.
Disconnect the Gojo Soap Dispenser from the Wall Mount
Removing a Gojo soap dispenser from its wall mount is a rather straightforward process. Before attempting this task, make sure to have all the necessary tools such as a screwdriver, pliers, and adhesive remover. Once you’re ready, here’s a step-by-step guide on how to disconnect the Gojo soap dispenser from the wall mount.
Firstly, ensure that the Gojo soap dispenser is empty. To prevent any soap spillage, cover the bottom of the dispenser with a plastic bag. Then, locate the screws that are securing the dispenser to the wall mount. Use a screwdriver to unscrew these screws gently.
After removing the screws, slowly move the dispenser away from the wall mount. The dispenser may be connected to the wall mount with adhesive, so use pliers to loosen the dispenser from the adhesive if necessary. Once the dispenser is disconnected from the wall mount, you can easily clean any remaining adhesive residue from the surface using an adhesive remover. And that’s it – you’ve successfully disconnected the Gojo soap dispenser from the wall mount!
You may also like: How to Open a Renowned Soap Dispenser: A Step-by-Step Guide
Remove the Soap Dispenser from the Wall Plate
Removing the soap dispenser from the wall plate is a critical step in the process of uninstalling the fixture. The dispenser has to be detached carefully and gently from the wall to avoid any damage to the plate, the dispenser, or the wall itself. With a few important steps and guidelines, this process can be effortless and smooth.
To remove the dispenser from the wall plate, users need to hold the dispenser with one hand while grasping the top of the wall plate with the other hand. Next, they have to press the dispenser’s release buttons, which will loosen and unlock the dispenser from the wall plate. After that, users need to gently and steadily pull the dispenser away from the plate, unhinging it entirely. Finally, to ensure the cleanliness of the soap dispenser, users should wipe it down with a soft cloth and disinfectant before storing it.
Disassemble the Gojo Soap Dispenser
Disassembling a Gojo soap dispenser is an essential step in removing it from its mounting bracket. It involves taking it apart to separate the dispenser from its base. Before you begin, you need to make sure that the unit is empty and that you have turned off the water supply connected to it.
The first step is to locate the locking mechanism on the dispenser’s base, which is usually under the unit. Use a flathead screwdriver to push the locking tab inwards, and while doing so, lift the dispenser off the bracket. This will separate the dispenser from the base, and you can now take the unit apart to remove it. Be careful not to lose any screws or small parts while disassembling the dispenser.
Related Post: How to Easily Open Your Joseph Joseph Soap Dispenser: A Step-by-Step Guide
Clean and Sanitize the Soap Dispenser
Once you have successfully removed the Gojo soap dispenser, it is important to clean and sanitize it before reinstalling or disposing of it. Cleaning will ensure that no trace of soap, grime, or other impurities linger in the dispenser, while sanitizing will eliminate any bacteria or germs that may be present on its surface.
To clean the dispenser, start by emptying any leftover soap and rinsing the container with hot water. Use a soft-bristled brush or sponge to scrub the dispenser’s interior and exterior thoroughly, making sure to reach all the crevices and corners. Then, rinse it well with hot water and let it air dry. To sanitize the dispenser, you can use a disinfectant spray or wipe, following the manufacturer’s instructions. Alternatively, you can create a homemade solution by mixing water and vinegar or hydrogen peroxide. Apply the solution to the dispenser’s surface, let it sit for a few minutes, and then rinse it well with hot water and let it air dry. With a clean and sanitized Gojo soap dispenser, you can be confident that you are providing your guests and clients with a safe and hygienic handwashing experience.
Reassemble and Reinstall the Gojo Soap Dispenser
Once you have successfully removed the Gojo soap dispenser from the wall, the next step is to disassemble the various parts and components of the dispenser. This will allow you to clean and sanitize all the parts before you reassemble the dispenser. Make sure to use an appropriate cleaning solution suitable for the dispenser and let the parts dry completely before moving on to reassembly.
To reassemble the Gojo soap dispenser, begin by inserting the pump assembly into the dispenser’s collar. Next, place the collar onto the dispenser’s reservoir and tighten it securely. Finally, reattach the dispenser to the wall using the screws and brackets you removed earlier. Make sure everything is securely fastened and the dispenser is level. Test the dispenser to make sure it is working correctly and dispensing soap properly. With these simple steps, you can reassemble and reinstall your Gojo soap dispenser in no time and have it working as good as new.
Read Also: Best No Touch Hand Soap Dispensers for Germ-Free Hygiene
Troubleshooting Common Issues with Gojo Soap Dispensers
Troubleshooting common issues with Gojo soap dispensers can help you avoid needless frustration when trying to remove or replace them. One common issue is a dispenser that simply won’t budge when you’re trying to remove it. In this case, you may need to apply some extra force to get the dispenser to release from its mount. A flathead screwdriver can be especially helpful in prying the dispenser loose.
Another common issue is a dispenser that leaks or doesn’t dispense soap properly. In most cases, this is due to a clog in the soap dispenser nozzle. Simply remove the nozzle and soak it in warm water to dissolve any buildup that may be obstructing the flow of soap. If the issue persists, you may need to replace the nozzle entirely. By troubleshooting common issues with Gojo soap dispensers, you can keep your hands clean and your dispensers functioning properly with minimal hassle.
Final Words
In conclusion, removing a Gojo soap dispenser is a fairly simple process that does not require any professional assistance. Follow the steps mentioned above and you will be able to remove the dispenser in no time.
However, if you encounter any issues or difficulty in removing the dispenser, it is advisable to seek professional assistance. Leaving the dispenser unattended or pulling it out forcefully can cause damage to the wall or other surfaces and result in costly repairs. Therefore, it is better to be safe than sorry and seek help if you are unsure about the process. So go ahead and remove that Gojo soap dispenser with ease!
Further Reading: Best Refillable Foaming Soap Dispensers: Our Top Picks for Sustainable Handwashing