Water dispensers have become a necessary appliance in homes and offices today. With the convenience of having clean drinking water on demand, these machines have replaced the need for bottled water. However, like any other appliance, they need to be assembled and set up before they can be used. If you are planning to purchase a water dispenser and are unsure where to start when assembling it, we have got you covered.
In this article, we will provide you with a step-by-step guide on how to assemble a water dispenser with ease. We will walk you through the process, highlighting what you need to do and what you need to avoid. By the end of our article, you will have a clear understanding of how to assemble your water dispenser and have it up and running in no time.
Why Choose a Water Dispenser for Your Home or Office
Start:
Water dispensers are rapidly gaining popularity among households and offices. With the increasing concern over the quality of drinking water available, it makes sense to opt for a safer and convenient option like a water dispenser. There are various types of water dispensers in the market that cater to individual needs.
The primary reason for choosing a water dispenser is to ensure the availability of clean, filtered, and cold drinking water at all times. The tap water in many areas can be contaminated with harmful pollutants like lead, chlorine, or bacteria. A water dispenser filters the water through a multi-stage process, removing impurities and providing clean drinking water that is better in taste and quality. Moreover, water dispensers also provide hot water for making tea, coffee, or instant noodles. It saves time and energy and offers the convenience of having a drinking water source at arm’s reach.
Gather Your Tools and Materials for Assembly
Before starting the assembly process of a water dispenser, it is important to gather all the necessary tools and materials required for the task. Without the right set of tools, it is impossible to put the dispenser together in a proper manner. The following is a list of tools and materials that you may need:
Firstly, you will require a screwdriver, preferably a Phillips head screwdriver, and a crescent wrench. These tools are necessary for tightening and loosening the screws and bolts that hold the dispenser parts together. Additionally, you may also need a power drill for certain models.
Secondly, you will need to ensure that you have all the required materials such as the water dispenser parts, a manual guide, a dispenser bottle, and any other accessories that come with the model. Review the manual to ensure all items are present and that you are ready to commence the assembly process. By gathering all the necessary tools and materials before starting the process, you can ensure a smooth assembly process with minimal interruptions.
You may also like: How to Effectively Clean Your Avalon Bottom Loading Water Dispenser
Step 1: Install the Water Tank
Step 1 in assembling a water dispenser is to install the water tank. The water tank is the primary component of a water dispenser and needs to be placed securely before proceeding with the next steps. Start by removing the water tank from its packaging and placing it in a dry and clean area.
After that, locate the opening for the water tank at the top of the dispenser body and place the tank in line with the opening. Carefully slide the tank down the dispenser body into the proper position until it locks into the proper place. Check the tank’s alignment and ensure it is secure enough not to tip over or spill. Next, fill the tank with sufficient water supply for best usage, and your water dispenser will be ready to use.
Step 2: Attach the Dispenser Faucet
Step 2: Attach the Dispenser Faucet
Once you have the water dispenser body assembled, it is time to attach the dispenser faucet. To do this, you will need to locate the small hole on the top of the dispenser unit where the faucet will go. Ensure that you have all the pieces and hardware required before you begin.
First, insert the threaded end of the faucet through the hole on the top of the dispenser. Then, use the included nuts and washers to secure the faucet in place. Tighten the nuts with a wrench or pliers, but avoid overtightening to prevent damage to the threading. With the faucet attached, your water dispenser is almost ready for use.
Related Post: How Much Does It Cost to Rent a Water Dispenser: A Comprehensive Guide
Step 3: Connect the Water Supply Line
Step 3 of assembling a water dispenser is to connect the water supply line. This involves attaching the line from the source to the dispenser’s inlet valve. The inlet valve serves as the entry point for the water supply. Before connecting the line, ensure that the valve is switched off to avoid any water leakages. This can be done by turning the knob clockwise or by shutting off the water supply from the main source.
After switching off the valve, proceed to connect the line to the inlet valve. Tighten the nut with a wrench to secure the connection. It is important to ensure that the connection is tight enough to avoid any water leakages. Once this is done, switch on the valve to allow water to flow into the dispenser. Check for any leakages after turning on the valve to ensure that the connection is secure. Connecting the water supply line is a crucial step in assembling a water dispenser as it determines the dispenser’s functionality.
Step 4: Electrically Wire the System
Step 4: Electrically Wire the System
Once the water dispenser has been assembled, you will need to wire the system so that it can operate. You will need a power outlet nearby for the water dispenser to function. To begin, make sure the power is off before you begin attaching the wires to the back of the water dispenser.
The wires should be easy to connect by following the manufacturer’s guidelines. You will need to connect the three wires to their respective terminals and make sure that they are securely tightened. Once everything is in place, you can turn on the power and test the water dispenser. It is always best to have a professional electrician handle this step if you are not familiar with electrical wiring.
Read Also: How to Fix Primo Hot Water Dispenser: A Step-by-Step Guide
Step 5: Test for Leaks and Enjoy Your Refreshing Water Dispenser
Once you have assembled your water dispenser, it is crucial to test for leaks before putting it to use. Begin by filling the water tank with cold water and placing the bottle on the dispenser. Turn on the dispenser and check for any leaks or drips around the spigot, lid, and base of the dispenser. This step is essential as any leaks can damage the surface the dispenser is placed on and can pose a safety hazard.
After ensuring that there are no leaks, it is time to enjoy your refreshing water dispenser. But before you start using it, make sure to clean it thoroughly with soap and water. Fill the water tank with clean filtered water and have a glass ready to collect the first dispensed water. It is always a good idea to wash the dispenser regularly to prevent bacteria buildup. Drinking enough water every day is necessary for a healthy body, and a water dispenser at home or the office can encourage you to do so in a hassle-free manner.
Final Verdict
Assembling a water dispenser is a task that can seem daunting at first, but following a few simple steps can make the process easy and stress-free. Before beginning the assembly process, be sure to carefully read and follow the manufacturer’s instructions included with your water dispenser.
Remember to take your time and work methodically, ensuring that each piece is securely fastened and that the dispenser is level and stable when assembled. Keep your workspace clear and organized, and don’t hesitate to seek help from a friend or family member if needed.
By following these tips, you’ll be able to assemble your water dispenser quickly and easily, and enjoy safe and hassle-free access to clean and refreshing water whenever you need it. So don’t be intimidated by the assembly process – with a little patience and care, you’ll have your water dispenser up and running in no time!
Further Reading: How to Effortlessly Clean Your Nexus LXP Water Dispenser