Keeping your hands clean is essential for preventing the spread of germs and diseases. As a result, soap dispensers are becoming increasingly popular in public places such as malls, airports, and offices. Among them, Ecolab hand soap dispensers are one of the most prevalent because of the brand’s reputation for producing quality hand hygiene products. However, even the best quality dispenser might run out of soap, or it could malfunction. In this article, we will provide a step-by-step guide on how to change the Ecolab soap dispenser, so you can ensure its proper functionality and hygiene.
Changing an Ecolab soap dispenser doesn’t have to be overwhelming. Instead, it can be done with ease, saving time and effort for everyone. The guide is written in simple language and highlights every step you need to follow, even if you’re not technically inclined. We’ll explain the tools you need and the precautions you should take before starting the process. Reading this guide is beneficial to anyone who has an Ecolab soap dispenser in their office, restaurant, or any other public space. So let’s dive in and start our step-by-step guide!
Gather Necessary Materials and Tools
Before you begin changing the Ecolab soap dispenser in your commercial or industrial setting, it’s important to have all the necessary tools and materials at hand. The first and most obvious item you should have is the new soap dispenser itself. You’ll also need a Phillips head screwdriver, a wrench, and possibly a drill if you’re installing the dispenser on a wall.
Aside from the tools, you’ll also need some key materials to complete the installation. This includes screws and anchors (if you’re installing on drywall), a mounting bracket, and the appropriate supply hoses and fittings to connect to your building’s plumbing. It’s also important to remember to turn off the water supply to the old dispenser and drain any remaining liquid before proceeding with the installation. By gathering these materials and tools ahead of time, you’ll save yourself time and prevent any unnecessary headaches during the installation process.
Disassemble Ecolab Soap Dispenser
To disassemble an Ecolab soap dispenser, you must first ensure that you have turned off and unplugged the dispenser from the power source. Next, you must carefully remove the cover of the dispenser. Depending on the model of the Ecolab dispenser you are using, the cover may snap off or may require the use of a screwdriver to remove screws. Once the cover is removed, you can proceed to the next step.
The next step involves removing the pump from the dispenser. You can do this by using a pair of pliers to carefully unscrew the pump from the dispenser. Be sure to grip the pump firmly to prevent any slippage or damage. Once the pump is removed, you can then clean and replace it, or replace the dispenser with a new one. Overall, disassembling an Ecolab soap dispenser is a fairly simple process that requires a few basic tools and a bit of patience.
You may also like: What Is the Best Foaming Soap Dispenser for Effortless Handwashing?
Remove Old Soap Residue
Before you replace the Ecolab soap dispenser, it is essential to clean it thoroughly. This will ensure that no old residue remains inside the dispenser, which can cause blockages and affect the flow of soap. Begin by removing any excess soap or debris from the dispenser using a cloth or tissue.
Next, it’s time to remove the old soap residue. Take a bowl and fill it halfway with warm water. Add a few drops of dish soap or vinegar to the water and mix well. Dip a cloth or sponge into the solution and wring out any excess water. Now, use the cloth or sponge to scrub the inside of the dispenser thoroughly. Make sure you remove all the old soap residue, as it can harden and clog the dispenser. Once you’ve done that, rinse the dispenser with clean water and let it air dry completely before proceeding to the next step of changing the Ecolab soap dispenser.
Install New Soap Dispenser Pump
Once you have removed the old soap dispenser pump, it’s time to install the new one. Before you start, make sure that you have the new pump and all the necessary tools at hand. Begin by inserting the long end of the pump into the hole on the dispenser, and then twist it clockwise until it sits in place.
Next, slide the spring onto the pump, followed by the black washer. Make sure that the washer sits directly on top of the spring, and then screw on the retaining nut. Use the pliers to tighten the nut, but be careful not to over tighten and damage the new pump. Finally, test the new dispenser pump by pressing it a few times to see if the soap comes out smoothly. Once you are satisfied with the results, you can close the cover and enjoy your clean hands.
Related Post: How to Transform a Wine Bottle into a Stylish Soap Dispenser
Reassemble Ecolab Soap Dispenser
After cleaning and replacing any broken parts, it’s time to put the Ecolab Soap Dispenser back together. Begin by inserting the pump head into the dispenser body, ensuring that it is secure. Next, insert the soap bottle into the dispenser body, twisting it clockwise to lock it in place. Make sure the tube from the pump head is inserted into the soap bottle and secure.
Once the soap bottle is secure, insert the dispenser cover by lining up the holes with the dispenser body and twisting it clockwise to lock it in place. Finally, attach the dispenser key to the cover if necessary. Test the dispenser by pressing the pump head to check that the soap is dispensed. If the dispenser isn’t dispensing soap or there are any issues with assembling it, refer to the product manual or contact Ecolab customer service for assistance.
Test Ecolab Soap Dispenser
After replacing the soap dispenser, it is crucial to test it to ensure proper functionality. Testing the Ecolab soap dispenser involves simple steps that can be completed in a few minutes.
First, fill the soap dispenser with water and let it pump a few times. Check if water is dispensed at the appropriate pressure and amount. If the water is not coming out as it should be, you may need to adjust the pump’s settings or check for any obstructions in the dispenser’s nozzle.
Once the dispenser is dispensing water satisfactorily, fill it with soap and repeat the process. Ensure the soap is dispensed appropriately. If the soap is not coming out correctly, you may need to adjust the soap-to-water ratio or check for any obstructions that may be preventing proper soap flow. With these simple steps accomplished, your Ecolab soap dispenser should now be fully functional and ready for use.
Read Also: Why Isn’t My Dishwasher Soap Dispenser Opening? Common Reasons and Solutions
Maintenance Tips for Ecolab Soap Dispenser
Proper maintenance is crucial in ensuring the longevity and effectiveness of your Ecolab soap dispenser. To keep it in excellent condition, always clean it regularly using mild detergents and water. Avoid using harsh chemicals or solvents as they might damage the dispenser’s surface. After cleaning, rinse the soap dispenser thoroughly and ensure it is thoroughly dry before refilling it with soap.
To prevent clogs from forming inside the dispenser, use only soap that is recommended for use with Ecolab soap dispensers. Avoid using soap that is too thick or too thin as it may affect the dispenser’s performance. Additionally, it is vital to inspect the dispenser’s trigger, tubes, and nozzles regularly to ensure they are clean and free from blockages. By following these simple maintenance tips, you can keep your Ecolab soap dispenser functioning efficiently for a long time.
Final Words
After following the aforementioned steps, you should now be able to successfully change your Ecolab soap dispenser. It is important to note that while this process may seem daunting at first, it is actually quite simple and straightforward once you get the hang of it.
Remember to always wear gloves and take your time. By properly maintaining your soap dispenser, you can ensure that it continues to function efficiently for many years to come. With these tips in mind, you’ll be well on your way to a hygienic and hassle-free hand washing experience.
Further Reading: How to Fix a Kitchen Sink Soap Dispenser Pump: Easy DIY Solutions