A water dispenser is a convenient appliance to have in your home or office. It provides easy access to refreshing and clean water, eliminating the need for bottled water. However, changing the water dispenser jug can be a daunting experience, especially if you have never done it before. Fortunately, it is a simple and straightforward process that you can easily do yourself.
In this article, we will provide you with a step-by-step guide on how to easily change your water dispenser jug. Whether you have a bottom-loading or top-loading dispenser, we have got you covered. By following these simple steps, you will be able to change your water dispenser jug quickly and efficiently, without any hassles or complications. So, let’s dive in and get started!
Gather Materials and Prep the Jug
When you need to change the water dispenser jug, the first thing to do is gather all the necessary materials. You will need a new water jug, a clean towel, and a small step ladder if you are not tall enough to reach the top of the dispenser easily. Once you have gathered everything, it’s time to prepare the jug for installation.
Start by wiping down the neck of the water dispenser with a clean, damp towel to remove any dust or debris. Then, remove the protective covering from the new water jug and place it on the towel with the cap facing up. To prevent any accidental spills, make sure the cap is tightly secured before lifting the jug onto the dispenser. Now that you are ready, let’s move on to the next step.
Remove the Old Jug and Clean the Spout
The second step in changing your water dispenser jug is to remove the old jug and clean the spout. This is an important step because it ensures that you have a clean and fresh supply of water. First, turn off the dispenser and unplug it from the electrical outlet. Then, carefully lift the old jug upward and out of the dispenser. Be sure to hold it securely to prevent any spills or splashes.
Next, use a clean cloth or paper towel to thoroughly clean the spout area where the old jug was attached. This will help to remove any dirt or debris that may have accumulated and ensure a clean surface for the new jug to be attached. Once the spout is clean, you can proceed to the next step of inserting the new water dispenser jug. By following these simple steps, you can easily change your water dispenser jug and have a fresh supply of water for your home or office.
You may also like: How Does an Automatic Water Dispenser Work? A Beginner’s Guide.
Position the New Jug and Attach to the Spout
Once you have successfully removed the empty water jug from your dispenser, it is time to position the new jug correctly and attach it to the spout. The first thing you need to do is to ensure that the new jug is of the right size and type as specified by your dispenser’s manufacturer. Once you have confirmed this, you can move on to the next step.
Now, hold the new jug with both hands and carefully lift it up. Position it in such a way that the spout of the dispenser aligns properly with the hole on top of the jug. Gently push the jug down until the nozzle of the dispenser fits snugly into the hole. You will hear a clicking sound indicating that the jug is securely attached. Give it a slight tug to ensure that it is well attached and that the water is flowing smoothly. With this, you have successfully positioned the new jug and attached it to the spout.
Prime the New Jug and Check for Proper Dispensing
Once you have successfully replaced the old jug with a new one, it’s important to prime the new jug before dispensing water. Priming helps to remove air pockets that may have formed during the installation process and ensures that water flows smoothly from the dispenser without any disruptions.
To prime the new jug, simply press down on the dispenser button and let the water flow for a few minutes. This helps to flush out any air bubbles that may have formed and ensures that the dispenser is ready for use. Once the water is flowing smoothly, it’s important to check for proper dispensing by testing the water temperature and flow rate. If you notice any issues with the dispensing, such as water coming out too slowly or not at all, it may be necessary to repeat the priming process or make some adjustments to the dispenser settings. By following these simple steps, you can ensure that your water dispenser is functioning properly and providing fresh, clean water every time you need it.
Related Post: How to Clean Your Refrigerator Water Dispenser: A Step-by-Step Guide
Troubleshooting Common Issues
Troubleshooting Common Issues
Although changing the water dispenser jug is a simple task, you might encounter some common issues. One of them is air bubbles, which can prevent water from flowing through the dispenser. To fix this, you can remove the empty jug and wait for a minute before inserting the new one. Alternatively, you can press the water dispenser button for a few seconds to purge the air from the system.
Another common issue is leaking water. This may occur if the jug is not properly seated or if the dispenser spout is blocked with debris. In such cases, you should turn off the dispenser, remove the jug, and inspect the spout for clogs or obstructions. You can also clean the dispenser thoroughly with a mild detergent and warm water to remove any dirt or residues that may cause leaks. Keep in mind that if you experience consistent problems with your water dispenser, you may need to replace the dispenser unit entirely.
Maintaining Cleanliness and Hygiene of Your Water Dispenser
Maintaining cleanliness and hygiene of your water dispenser is crucial for keeping germs and bacteria at bay, as it is the primary source of drinking water in your home or office. To maintain hygiene, you should clean your water dispenser regularly. Dip a clean cloth into a solution of mild detergent and water, and use this to clean the dispenser’s exterior. Wipe it thoroughly with a dry cloth, and ensure that no water remains on the surface.
To clean the water reservoir, remove the water jug first, and then use a mix of water and vinegar to run through the dispenser. Leave it to sit for a few minutes and then rinse it thoroughly using clean water. In conclusion, maintaining the hygiene of the water dispenser is not rocket science, and it is easy to keep your water dispenser clean and hygienic when you follow these simple steps. As a result, you can maintain your health and the health of everyone who drinks from the dispenser.
Read Also: How Does an Instant Hot Water Dispenser Work? A Comprehensive Guide.
Benefits of Using a Water Dispenser and Jug System
Using a water dispenser and jug system has several benefits. Firstly, it provides access to clean and safe drinking water. Many people are hesitant to use tap water for drinking purposes due to concerns about impurities and contamination. With a water dispenser and jug system, you can be sure that the water you are drinking is pure and safe.
Secondly, water dispensers and jugs are environmentally friendly. By using a refillable dispenser and jug system instead of buying single-use water bottles, you are reducing the amount of plastic waste that ends up in landfills and oceans. This not only helps the environment but also saves you money in the long run. Overall, investing in a water dispenser and jug system is a smart and sustainable choice.
Conclusion
Changing the water dispenser jug is an easy task that you can perform with minimal effort and guidance. The process essentially involves removing the empty jug, cleaning the dispenser, and replacing it with a new jug. With the right tools and understanding of the steps involved, you can easily carry out the task and enjoy refreshing water from your dispenser.
In conclusion, changing the water dispenser jug should not be a daunting task for anyone. With our step-by-step guide, you can confidently change your jug without any mishaps. However, if you encounter any challenges along the way, seek professional help to avoid damaging your dispenser or risking your safety. Remember to clean and replace the jug regularly to maintain the hygiene of your dispenser and enjoy clean and refreshing water every time you use it.
Further Reading: How to Clean Your Whirlpool Refrigerator Water Dispenser in 5 Easy Steps