Water dispensers in LG refrigerators are a wonderful convenience for those who always like to have access to fresh and pure water. However, over time, dust, dirt, and bacteria can accumulate in the dispenser, and this can lead to unpleasant odors and even health risks. Therefore, it is essential to regularly clean and maintain your LG refrigerator’s water dispenser to ensure the water remains fresh and healthy.
In this guide, we will take you through a step-by-step process on how to clean your LG refrigerator’s water dispenser, from gathering the necessary materials to disassembling and cleaning each component and finally reassembling it. You don’t need any special tools or skills to carry out the cleaning, and with these simple steps, your LG refrigerator’s water dispenser will be as good as new.
Preparation and Materials Required
When it comes to cleaning a water dispenser in an LG refrigerator, preparation is key. To ensure that the cleaning process goes smoothly, you will need to gather a few materials. For starters, you will need a clean sponge, a soft bristled brush, white vinegar, warm water, and a clean towel. Make sure that these materials are readily available before you begin the cleaning process.
Before you start cleaning, unplug your refrigerator and make sure that the water dispenser is empty. If there is any leftover water in the dispenser, dispose of it. This will ensure that the cleaning process is thorough and effective. Once you are sure that your refrigerator is unplugged and the dispenser is empty, you can move on to the next step of the process.
Turn Off the Water Supply
The first step in cleaning the water dispenser in your LG refrigerator is to turn off the water supply. This is an important safety measure that will prevent water from accidentally spraying out or leaking during the cleaning process. To turn off the water supply, locate the water shut-off valve behind or under the refrigerator. This valve may be connected to a copper or plastic water supply line.
Once you have located the valve, turn it clockwise until it is fully closed. You may also need to unplug the refrigerator to ensure that no water is flowing through the dispenser. Remember to keep the refrigerator unplugged until you have completed the cleaning process and have turned the water supply back on. By turning off the water supply, you can easily and safely clean your LG refrigerator’s water dispenser, ensuring that it functions properly and provides clean, refreshing water.
You may also like: How to Calibrate Your Whirlpool Water Dispenser for Optimal Performance
Remove the Water Filter
Removing the water filter is an essential step in cleaning your LG refrigerator’s water dispenser. The filter typically needs to be replaced every six months or sooner if you notice a decrease in water flow or an off taste. To remove the filter, locate the filter in your refrigerator’s water dispenser and turn the filter counterclockwise until it releases from the filter head. Gently pull the filter downward and out of the filter head. If you have trouble removing the filter, refer to your owner’s manual for troubleshooting tips.
Before disposing of the old filter, verify the replacement filter part number to ensure you have the correct replacement. Place the old filter in a plastic bag and dispose of it properly. Do not attempt to wash or reuse the old filter, as it can become clogged and compromise the quality of the water. With the filter removed, you can now proceed with cleaning the water dispenser thoroughly.
Clean the Water Dispenser
To clean the water dispenser in your LG refrigerator, you first need to unplug the appliance. This is an essential safety measure to prevent any electrical accidents. Once unplugged, turn off the water supply and remove the water filter (if applicable). It is essential to clean the filter separately according to the manufacturer’s instructions.
Next, mix a solution of warm water and mild dish soap. Dip a clean cloth in this solution and use it to clean the exterior of the dispenser. Pay attention to the buttons, levers, and spout, as these areas are most prone to build-up and grime. Once you have cleaned the exterior, use a clean, dry rag to wipe away any excess moisture. Finally, reassemble the water filter, turn the water supply back on, and plug in your LG refrigerator.
Related Post: Best Water Dispensers with Ice Maker for Your Home or Office
Reinstall the Water Filter
After you have cleaned the water dispenser thoroughly, it is important to reinstall the water filter to ensure clean and safe drinking water. Before reinstalling, ensure that the filter is clean and dry. If it is reusable, follow the manufacturer’s instructions for cleaning and drying.
To reinstall the water filter, locate the filter housing inside the refrigerator. It is usually found in the upper right-hand corner or the bottom left-hand corner of the fridge. Follow the instructions provided by the manufacturer, which usually involves twisting the filter counterclockwise to remove it and then twisting the new filter clockwise to install it. Once the filter is securely in place, run a few gallons of water through the dispenser to flush out any air pockets. Finally, use the dispenser to check if the water is flowing smoothly and if there are no leaks in the system.
Turn On the Water Supply and Check for Leaks
After you have successfully cleaned the water dispenser in your LG refrigerator, it’s time to turn on the water supply and check for any leaks. Make sure the water supply valve is turned on and the fridge is plugged in. Then, allow the water dispenser to fill up for a couple of minutes, and check for any signs of leakage.
It’s important to conduct a thorough check for leaks to ensure the safety of your appliance and prevent any water damage to your home. If you find any leaks, shut off the water supply valve immediately and tighten the connections or call a professional for help. However, if no leaks are found, you can enjoy clean and fresh water dispensed by your LG refrigerator at any time. Remember to clean the dispenser regularly to maintain its efficiency and prolong the lifespan of your appliance.
Read Also: Why Does Your Refrigerator Water Dispenser Drip? Find Possible Causes and Solutions
Maintaining Your LG Refrigerator Water Dispenser
Maintaining your LG refrigerator water dispenser regularly is crucial to ensure that it functions optimally. It’s not enough to clean the dispenser occasionally, as it needs constant checking to keep it in good condition. One of the ways to maintain your LG refrigerator water dispenser is by replacing the water filter every six months or so. New filters keep the water fresh and help in filtering out contaminants from the water.
Another way to maintain your LG refrigerator water dispenser is by keeping it dry after every use. This prevents water from accumulating around the dispenser, which can lead to mold growth or other types of bacterial growth. Lastly, it is important to regularly inspect the tubes and dispenser nozzle for any signs of damage or blockage. By following these simple maintenance tips, you can make sure that your LG refrigerator water dispenser remains functional for years to come.
Wrapping Up
In conclusion, the water dispenser in LG refrigerator is an essential appliance that requires proper maintenance and cleaning. A dirty water dispenser can lead to contamination and even health hazards. Therefore, it is crucial to clean your water dispenser regularly with safe and efficient methods.
By following the steps mentioned above, you can easily clean your LG refrigerator water dispenser without any hassle. Remember to use only safe and natural cleaning solutions. Additionally, it is advisable to clean your water dispenser once a month and replace the filters every six months to ensure the quality of the water. By doing so, you can prolong the life of your refrigerator while enjoying safe, clean, and refreshing water at all times.
Further Reading: How to Easily Change Your PUR Water Filter Dispenser: A Simple Guide