Are you tired of waiting for your kettle to heat up every time you want a cup of tea or coffee? Adding an InSinkErator hot water dispenser to your kitchen can make instantly boiling water a reality. Not only does it save time, but it can also be a convenient addition for cooking, cleaning, or even warming baby bottles.
While it may seem like a daunting task to install a hot water dispenser, it is actually a straightforward process that can be done in just a few hours. In this article, we’ll guide you through the steps involved in installing an InSinkErator hot water dispenser in your kitchen, so you can enjoy hot water on-demand in no time.
Gather Materials and Tools
Before you begin installing an InSinkErator hot water dispenser in your kitchen, it’s important to gather all the necessary materials and tools. That way, you’ll have everything you need at your fingertips and won’t have to make extra trips to the hardware store in the middle of your installation.
The materials you’ll need for this project include the hot water dispenser unit, a water filtration system (if desired), a hot water tank, a power cord, an installation kit, and a shut-off valve for your water supply. You’ll also need a few basic tools, such as a wrench, a screwdriver, pliers, a drill, and an adjustable wrench. It’s worth taking the time to gather all these materials and tools before you start the installation, as this will make the process much smoother and quicker.
Turn Off the Water Supply
Before starting the installation process, you must turn off the water supply to your kitchen. This is an essential step because you’ll be dealing with water lines and pipes during the installation. To turn off the water supply, locate the valve under your sink or in the basement.
Turn the valve to the right to shut off the water supply to your kitchen. After turning off the valve, open the faucets to check if the water supply has been successfully shut off. This step ensures that there’s no water left in the pipes and that you can begin the installation process without any mishaps. If you face any difficulty in locating the valve or turning it off, consult a professional plumber to assist you with the process.
You may also like: How to Effectively Clean Your Water Dispenser from Your Refrigerator
Install the Hot Water Dispenser Unit
Installing the hot water dispenser unit is the main part of the installation process. Once you have prepared the sink and installed the tank, it’s time to connect the hot water dispenser unit to the tank and the faucet. First, locate the mounting hole in your sink and line up the dispenser unit with it. Tighten the mounting screws to secure it in place.
Next, connect the hot water line to the dispenser unit, ensuring that it is firmly in place and not leaking. Then, attach the tank to the dispenser unit using the provided tubing, but make sure that the tubing is not kinked or twisted. Finally, connect the dispenser unit to the faucet by attaching the provided tubing to the valve stem and tightening it in place. Turn on the hot water supply, and you’re ready to enjoy on-demand hot water from your InSinkErator dispenser.
Connect the Hot Water Line
After mounting the hot water dispenser unit securely in place, you will need to connect the hot water line. First, turn off the water supply. Next, locate the cold water supply valve under the sink and turn it off as well. You can now disconnect the cold water hose from the valve.
The next step is to connect the hot water line from the dispenser to the hot water inlet valve. You may need to use a T-fitting to connect the hot water line. Ensure that all connections are secure and tight before turning the water supply back on. Check for any leaks from the connections and make adjustments if necessary. Once everything is in place, you can turn on the hot water dispenser to test its functionality, and you are now ready to enjoy hot water on demand!
Related Post: Best Filtered Water Dispensers For Fridge: Top Picks and Reviews
Connect the Electrical Wiring
Connecting the electrical wiring is a crucial step in installing an InSinkErator hot water dispenser in your kitchen. Before you start, make sure you have turned off the power supply to the area. Once you have done this, begin by attaching the power cord to your dispenser. Strip off the insulation at the end of the wire and thread it through the strain relief clamp. Tighten the clamp with a screwdriver until the cord is securely fastened.
Next, connect the wires to the appropriate terminals in the junction box. Make sure to follow the wiring diagram and attach the wires correctly. You can use wire connectors to join the wires together and ensure a solid connection. Once you have finished, carefully tuck the wires back into the junction box and screw the cover plate back on. Finally, turn on the power and test your dispenser to ensure it is working properly. By following these steps, you can successfully connect the electrical wiring for your InSinkErator hot water dispenser and enjoy hot water on demand in your kitchen.
Install the Accessory
The installation process for an InSinkErator hot water dispenser includes the installation of the accessory. The accessory consists of an on/off switch, thermostat, and a power cord. To install the accessory, the first step is to cut a hole in the sink for the dispenser. The hole should be the correct size and shape for the dispenser to fit securely.
Once the hole is prepared, the accessory can be installed by carefully following the installation instructions provided with the dispenser unit. It is essential to ensure that the accessory is wired correctly and securely fastened in place. After completing this step, test the dispenser to ensure that hot water is flowing correctly, and the dispenser is dispensing hot water at the desired temperature. The installation of the accessory may seem tricky, but with the right tools and careful attention to detail, any homeowner can accomplish it with ease.
Read Also: Why Does My Refrigerator Water Dispenser Not Work? Troubleshooting Tips to Fix It
Test and Use Your New Hot Water Dispenser
Once you have successfully installed your InSinkErator hot water dispenser, it is important to test it out to ensure everything is working correctly. To do this, plug in the dispenser and turn on the hot water faucet. You should see a steady stream of hot water flow from the faucet. If the water does not dispense, double-check the installation steps to make sure there are no missed instructions.
Once you have confirmed that the dispenser is working correctly, it is time to start using it. This hot water dispenser can be a very convenient addition to your kitchen, providing hot water on demand for teas, soups, and other hot drinks or meals. Simply fill your cup or pot with the desired amount of water and place it under the faucet. Push down the lever to dispense hot water, and you’re all set! Enjoy the convenience and time-saving benefits of your new InSinkErator hot water dispenser.
Final Verdict
In summary, installing an Insinkerator hot water dispenser is a quick and easy process that can make your life much more convenient. With just a few tools and a bit of patience, you can have hot water at your fingertips in no time.
So, if you’re tired of waiting for a kettle to boil or simply want a more efficient way to make coffee, tea, or soup, consider installing an Insinkerator hot water dispenser in your home. With its sleek design, durable construction, and energy-saving features, this handy appliance is sure to become a staple in your kitchen for years to come. So why wait? Start enjoying hot water on demand today!
Further Reading: Best Countertop Water Filter Dispensers: Top Picks for Clean Drinking Water