An InSinkErator hot water dispenser can make life easier in the kitchen, providing instant access to hot water for brewing tea or coffee or cooking soups and noodles. However, if you no longer need or want the dispenser, it’s important to remove it properly to avoid damaging your plumbing or electrical systems. Fortunately, dismantling an InSinkErator hot water dispenser is a relatively simple task with the right tools and instructions.
In this article, we’ll walk you through step-by-step instructions on how to remove an InSinkErator hot water dispenser, including the tools you’ll need and safety precautions to take. With these tips, you can safely and easily remove your hot water dispenser without damaging your sink or causing any mishaps. So, whether you’re planning to upgrade your kitchen or simply want to remove an unused dispenser, read on for all the information you need to get the job done right.
Gather necessary tools and materials for the job
Before beginning the task of removing an InSinkErator hot water dispenser, it is important to gather all the necessary tools and materials for the job. The tools required for the job include a screwdriver, pliers, an adjustable wrench, and a bucket or container to collect any water that may spill out during the process. A disconnect clip is also needed if your hot water dispenser is hardwired.
In addition to the tools, there are a few materials required such as Teflon paste or tape, electrical tape, and a new hot water dispenser (if you plan to replace the existing one). It is important to ensure that you have all the necessary tools and materials before starting the process to avoid any delays or complications during the removal of the hot water dispenser. With the tools and materials gathered, it is now time to move on to the next step of removing the InSinkErator hot water dispenser.
Shut off power and water supply to the dispenser
Before you begin the process of removing an InSinkErator hot water dispenser, it is crucial to shut off the power and water supply to the unit. Firstly, locate the main power switch or breaker to the unit and turn it off. This ensures that there is no electricity flowing through the dispenser as you dismantle it.
Next, turn off the water supply to the hot water dispenser. To do this, locate the valve that controls the water supply to the dispenser and turn it off. If you’re not sure which valve controls the supply, you can refer to the manufacturer’s instructions for guidance. Remember to turn off the hot water supply valve only since shutting off the cold water valve would impact other faucets and appliances in your home. Double-check that both power and water supplies are properly turned off before starting the removal process. Following these safety guidelines is paramount in avoiding any untoward incidents or accidents during the removal process.
You may also like: What Makes The Best Bottom Loading Water Dispenser?
Remove the dispenser from the sink
The third step in removing an InSinkErator hot water dispenser is to detach the dispenser from the sink. Begin by turning off the water supply to the dispenser using the shut-off valve under the sink. It is important to do this to prevent any water spillage during the removal process.
Next, unscrew the nuts or bolts that are holding the dispenser in place using a wrench. Hold the dispenser with one hand and detach it from the mounting assembly by gently twisting and pulling it upwards. If the dispenser is stuck, you might want to use a screwdriver to help pry it off the sink. Once the dispenser is free, carefully place it aside, ensuring that the electrical connections and tubing are not disconnected or damaged. With the dispenser now removed, the next step is to disassemble it for proper storage or disposal.
Disconnect wiring and plumbing connections
Disconnecting the wiring and plumbing connections of an InSinkErator hot water dispenser is a crucial step towards its removal. Before initiating the process, ensure to turn off the circuit breaker or switch that supplies electricity to the dispenser. Once done, unplug the dispenser from the power outlet. Start by removing the wires connecting the dispenser to the power source. Use a screwdriver to loosen the terminal screws of the dispenser, and remove the wires from the terminals.
Moving to the plumbing connections, shut off the water supply valve that connects to the dispenser. Depending on the plumbing system, the valve may be located under the sink or at the main water supply line. Next, detach the water supply hose from the dispenser. Use pliers to loosen the connecting nuts of the hose and detach it from the dispenser port. Carefully remove any remaining plumbing connections, which may include a drain line or a saddle valve. Once all the connections have been detached, the InSinkErator hot water dispenser can be safely removed.
Related Post: Is a Water Dispenser on a Fridge Worth It? A Comprehensive Analysis
Remove mounting hardware and dispose of the dispenser
Once you have turned off the power and water supply, the next step is to remove the mounting hardware that holds the InSinkErator hot water dispenser securely in place. Use a screwdriver or an adjustable wrench to loosen the screws that attach the mounting bracket to the countertop or sink. The screws may be hidden under the decorative cap or cover plate, which can be removed using a flathead screwdriver or a pliers.
Before you can dispose of the hot water dispenser, you need to detach it from the mounting bracket. This is done by lifting the dispenser up and off the bracket. Depending on the model, you may need to wiggle it or twist it slightly to release it from the bracket. Once the dispenser is free, you can clean the surface underneath it and the mounting bracket, as well as any mineral buildup or debris that may have accumulated inside the dispenser. Finally, you can discard the old dispenser safely and in accordance with local regulations.
Patch and seal any holes left behind
After successfully removing your InSinkErator hot water dispenser, it is necessary to patch and seal any holes left behind. These holes can be in the sink or countertop, depending on where the dispenser was installed. Leaving these holes unfilled can result in water and debris getting into the opening, leading to damage or foul odor.
To patch these holes, you have two options- silicone caulk or a sink hole cover. Silicone caulk is the easiest option, and it’s ideal for sealing small holes. Apply the caulk around the hole and smooth it out with a putty knife or your finger. Allow the caulk to dry completely before using the sink.
Sink hole covers can be used for larger holes, and they come in several finishes to match your sink. They are easy to install, and you only need to insert them into the hole and tighten the screw. Whichever method you choose, ensure that the hole is adequately sealed to prevent any further damage or inconvenience.
Read Also: How to Make a Dog Water Dispenser: A Step-by-Step Guide
Reconnect plumbing and power supply to the sink.
Now that the InSinkErator hot water dispenser has been removed, it’s time to reconnect the plumbing and power supply to the sink. Begin by placing the mounting bracket back onto the sink and securing it with screws. Next, connect the water supply line to the dispenser’s inlet valve. Make sure the connection is tight and free from leaks.
Once the water supply line is connected, it’s time to reconnect the power supply. First, turn off the power to the circuit that supplies electricity to the dispenser. Then, connect the dispenser’s power cord to the outlet and turn the power back on. To test that the dispenser and its connections are working correctly, run cold water through the tap for a few minutes before switching to hot water. Finally, double-check all connections and test the hot water dispenser to ensure it’s fully functional.
Final Verdict
Removing an Insinkerator hot water dispenser may seem like a daunting task, but with the right tools and instructions, it can be done easily. It is important to follow the manufacturer’s guidelines to avoid any damages or accidents.
In summary, when removing an Insinkerator hot water dispenser, make sure to turn off the power and water supply, disconnect all the connections, remove the mounting screws, and gently pull the dispenser out. With these simple steps, you can successfully remove your hot water dispenser and have a smooth installation of a new one in the future.
Further Reading: How to clean your water dispenser: A step-by-step guide