Wall-mounted soap dispensers are a popular addition to washrooms and kitchens around the world. They provide a convenient and hygienic way to dispense liquid soap, shampoo, and hand sanitizer. However, there may come a time when you want to remove your dispenser, either because it’s no longer needed or because you’re redecorating. Removing a wall-mounted soap dispenser may seem like a daunting task, but it’s actually relatively easy if you know what you’re doing.
In this article, we’ll provide a step-by-step guide on how to easily remove a wall-mounted soap dispenser. We’ll cover everything from the tools you’ll need to the best techniques for removing the dispenser without damaging your walls or tiles. Whether you’re a DIY beginner or an experienced handyman, this article will give you all the information you need to get the job done quickly and easily. So, let’s get started!
Gather Materials and Tools Needed for the Job
Before you start removing your wall-mounted soap dispenser, it’s always important to gather all the necessary materials and tools you’ll need for the job. Doing so will not only save you time but also minimize any potential damages to your bathroom walls.
You’ll need a few basic tools, including a screwdriver, a razor blade or box cutter, and a pair of pliers. Also, get a plastic bag or a small container to collect any screws or small parts that come off during the removal process. Grab a step stool if you need one, and put on a pair of gloves to protect your hands while removing the dispenser. Once you have all the tools in place, you’re ready to move on to the next step.
Turn off Water Supply and Drain Remaining Liquid
Before removing a wall-mounted soap dispenser, it’s important to turn off the water supply and drain any remaining liquid from the dispenser. This will prevent any water from leaking and causing damage to your bathroom or kitchen.
To turn off the water supply, locate the shut-off valve under the sink or behind the wall where the dispenser is installed. Turn the valve clockwise to shut off the water supply. Then, push the dispenser’s pump to allow any remaining liquid to flow out. If the dispenser has a drain plug, remove it to empty any remaining liquid into the sink. Once all the liquid has been drained, you’re ready to remove the dispenser from the wall. By following these simple steps, you can easily remove a wall-mounted soap dispenser without causing any damage or mess.
You may also like: How to Easily Open Afia NCL Soap Dispenser in a Few Simple Steps
Unscrew and Remove Soap Dispenser from Wall Mount
To remove a wall-mounted soap dispenser, you must first unscrew it from the wall mount. Before doing so, you should locate the screws holding the dispenser in place. Usually, there are two or more screws or bolts holding the dispenser to the wall. The screws can be located on the backplate or on the dispenser itself. Once you locate the screws, use a screwdriver or pliers to remove them.
After removing the screws, gently pull the dispenser away from the wall mount. If the dispenser is stuck to the wall or caulked in place, carefully use a putty knife or scraper to pry it away from the wall. Be sure to remove any adhesive residue left behind by the soap dispenser. With the dispenser removed, you can now clean the wall and prepare for any new installation. Remember to dispose of the soap dispenser, or if it still works, you can pass it on to someone else who may need it.
Patch Wall Holes and Repair Surface Damage
Once you have removed the wall mounted soap dispenser, you may be faced with unsightly holes and surface damage on your wall. Follow these easy steps to patch the holes and repair any damage:
Firstly, clean the area around the holes and damaged surface using a damp cloth and mild detergent. This will help you to properly assess the extent of the damage and identify the best materials needed for the repair. Next, fill any holes with spackling paste, using a putty knife to spread the paste evenly. Once the paste has dried completely, use fine-grit sandpaper to gently sand down any excess paste until it is level with the wall. For larger damage, you may need to use a wall patch kit that can be found at your local hardware store. Once the surface is patched, apply a coat of primer to the area and then finish by painting the wall to match the rest of the room.
Related Post: How to Easily Install a Sink Soap Dispenser in Your Home
Install Wall Plug or Temporary Cover Plate
Once you have removed the soap dispenser from the wall, you will be left with holes in the wall where the screws were attached. It is important to address these holes to ensure that your bathroom wall looks neat and additional moisture is kept out. The first option is to install a wall plug in the hole. A wall plug serves as an anchor for screws and can be found at any hardware store. Simply insert the wall plug into the hole and then screw in a new screw. This will ensure a sturdier base for the screw than the original hole.
Another option is to use a temporary cover plate to cover the holes. These plates come in various sizes and shapes and are designed to clip onto the wall, covering the unsightly holes. They can be found at any home improvement store and come in finishes that match common bathroom fixtures like chrome, bronze, and stainless steel. This option is perfect if you do not intend to install another soap dispenser or want to change the location of the holder. The plates offer a temporary solution for covering the holes until you decide how you want to address them in the future.
Reinstall Soap Dispenser or Install Replacement
After successfully removing the wall-mounted soap dispenser, it’s time to either reinstall it or install a brand new one. If you plan to reinstall the same soap dispenser, be sure to clean it thoroughly. Check for any damages or wear and tear that may affect the dispenser’s functionality. Reinstall the soap dispenser by following the manufacturer’s instructions, making sure to securely screw in all mounting hardware and ensure it’s level before refilling it with soap.
If you are replacing the soap dispenser, you’ll need to first choose a new one that matches the existing mounting holes. Consider the style and size of the replacement dispenser and make sure it fits with the decor of your bathroom or kitchen. Once you’ve selected the new soap dispenser, follow the manufacturer’s instructions for installation. Make sure to securely screw in all mounting hardware and ensure it’s level before filling it with soap. Don’t hesitate to call a professional if you need assistance with installing a replacement dispenser.
Read Also: How to effectively clean your front load washer soap dispenser
Test and Adjust Soap Dispenser for Optimal Performance
Testing and adjusting your soap dispenser after it has been removed from the wall is an important step to ensure optimal performance. To begin, fill the dispenser with soap and pump several times to determine the amount of soap dispensed with each pump. This will allow you to adjust the dispenser to your desired amount, whether you prefer more or less soap.
Next, test the dispenser with water to ensure that it is dispensing soap smoothly and evenly. If there are any issues, such as clogging or inconsistent dispensing, you may need to clean or adjust the dispenser nozzle. Once you are satisfied with the performance of the dispenser, you can re-install it onto the wall or find a new location for it. By testing and adjusting your soap dispenser, you can be sure that it will continue to function effectively for years to come.
Verdict
Removing a wall mounted soap dispenser can be a daunting task for some, but with the proper tools and techniques, it can be done in no time. Always remember to turn off the water supply and check for any remaining soap residue before removing the dispenser. Use a screwdriver or pliers to loosen the screws and detach the dispenser from the wall bracket. Lastly, clean and dry the wall surface before installing a new dispenser or patching it up.
In conclusion, it is important to follow the right steps and exercise caution when removing a wall mounted soap dispenser. With a little patience and effort, you can successfully remove it without damaging the wall or surrounding fixtures. Don’t hesitate to seek help or advice from a professional if you feel unsure about the process or encounter any unexpected problems. By taking care of your soap dispenser properly, you can ensure its longevity and usability for years to come.
Further Reading: Best Kitchen Soap Dispensers with Sponge Holder: A Convenient Must-Have for Every Kitchen