How to Easily Remove the Water Tray from your Primo Water Dispenser

A Primo water dispenser is a convenient appliance to have at home or in the office, providing easy access to clean and refreshing drinking water. However, just like any other appliance, it requires occasional cleaning and maintenance to ensure it functions optimally. One important component that needs cleaning is the water tray, which can accumulate dirt, bacteria, and mineral deposits over time.

Removing the water tray from a Primo water dispenser may seem daunting to some, especially if it is their first time doing it. However, with the right tools and steps, it can be a simple task that anyone can easily accomplish. In this article, we will guide you through the process of removing the water tray from your Primo water dispenser to clean it thoroughly and keep your appliance in top condition.

Quick Answer

To remove the water tray from a Primo water dispenser, first, unplug the device and empty the water from the reservoir. Then, locate the tabs at the bottom of the water tray and push them inward while gently lifting the tray out of its position. Clean the tray with soap and water and then reinsert it into the dispenser, making sure it clicks into place.

Table of Contents

Understanding the Primo Water Dispenser Water Tray

The water tray is an essential component of your Primo Water Dispenser and plays a vital role in keeping the surrounding area clean and dry. It is a shallow receptacle that sits beneath the water dispenser’s spout and collects any droplets of water that may fall while dispensing water.

The water tray is also removable, allowing for easy cleaning and sanitation. Removing it is a simple process, and it is an important maintenance step that should be a regular part of your cleaning routine. In the following sections, we will discuss the steps involved in safely and quickly removing the water tray from your Primo Water Dispenser.

The Tools You Will Need for Removing the Water Tray of Your Primo Dispenser

To remove the water tray from your Primo water dispenser, you will not need any fancy or expensive tools. In fact, all you need are some basic household items that you probably already have in your toolkit.

Firstly, you will need a pair of sturdy, rubber gloves to protect your hands from any water or residue that may be present in the tray. You will also need a clean rag or towel to wipe down the tray once it has been removed. Additionally, you will need a Phillips head screwdriver to loosen the screws that hold the tray in place, and a flathead screwdriver to gently pry the tray out of its slot. With these tools on hand, you’ll be able to remove the water tray quickly and easily, without any unnecessary frustration or hassle.

Step-by-Step Guide: Removing the Water Tray from Your Primo Water Dispenser

Removing the water tray from your Primo water dispenser is a simple task that can be accomplished in just a few steps. Start by unplugging the dispenser’s power source and disconnecting any hoses or tubes that are attached to it. This will ensure that your safety is not compromised during the process.

Next, locate the water tray which is usually located at the bottom of the dispenser. Check for any screws or locking mechanisms that may be holding the tray in place. If there are any, remove them using the appropriate tools. Then carefully slide out the tray until it completely separates from the dispenser. Finally, clean the tray and the dispenser thoroughly before reassembling it back together again. Following these simple steps will ease the process of removing the water tray from your Primo water dispenser.

Cleaning The Water Tray of Your Primo Water Dispenser

Cleaning the water tray of your Primo water dispenser is an essential step in maintaining the cleanliness and purity of your drinking water. Over time, algae, mold, and other contaminants can build up in the water tray, affecting both the taste and quality of the water you dispense.

To clean the water tray, start by unplugging the dispenser and removing the water bottle. Next, carefully remove the water tray from the bottom of the dispenser. Use warm, soapy water and a soft cloth to gently scrub the tray, making sure to remove any visible debris or buildup. Rinse the tray thoroughly with clean water and set it aside to air dry. Once dry, you can reassemble the Primo dispenser and enjoy fresh, clean drinking water once again. It is recommended to clean the water tray at least once every three months to ensure optimal performance and clean drinking water.

Troubleshooting Common Issues When Removing the Water Tray of Your Primo Dispenser

The process of removing the water tray from a Primo water dispenser is usually straightforward. However, sometimes things may not go as planned. This section of the article provides tips on how to troubleshoot common issues you may encounter when removing the water tray.

The first issue you may encounter is difficulty in removing the tray. If this is the case, ensure that the dispenser is unplugged, then gently wiggle the tray from side to side while pulling it upwards. If it still won’t budge, there may be some hidden clips or screws holding it in place that you need to locate and remove. The second common issue is a broken tray. If your tray is broken, you may need to replace it. Primo water dispenser trays are readily available in hardware stores or online.

Reassembling Your Primo Water Dispenser After Removing the Water Tray

Reassembling your Primo Water Dispenser after removing the water tray is a simple process that requires a few easy steps. First, ensure that the water tray is clean and free of any debris. Use a damp cloth or sponge to wipe down the tray and its surrounding area.

Next, carefully align the water tray with the slots on the dispenser base. Gently push the tray until it clicks into place. Make sure that the tray is level and does not wobble. Finally, insert the bottle onto the dispenser and plug in the power cord. Turn on the dispenser and test the flow of water to ensure that everything is functioning correctly. With these simple steps, you can easily reassemble your Primo water dispenser and have clean, refreshing water on hand whenever you need it.

Tips for Maintaining Your Primo Water Dispenser Beyond Water Tray Removal

To keep your Primo Water Dispenser functioning at its best, there are a few maintenance tips you should follow beyond water tray removal. Firstly, make sure you clean the dispenser regularly. This includes wiping down the exterior with a mild cleaning solution and removing any built-up scale or deposits from the dispenser nozzle. You can use a solution of white vinegar and water for this purpose.

Secondly, it is important to regularly replace the water filter. A dirty or clogged filter can affect the taste and quality of the water dispensed. Refer to your Primo Water Dispenser manual for instructions on how to replace the filter, and make sure you replace it at least every six months or as recommended by the manufacturer. By following these simple tips, you can ensure your Primo Water Dispenser provides you with clean and refreshing water for a long time to come.

Wrapping Up

Removing the water tray from a Primo water dispenser is a straightforward process that requires little effort. The key is to handle the tray delicately, as it can easily break or crack if not done correctly. It’s recommended to remove the tray periodically and clean it thoroughly to ensure that no harmful bacteria or contaminants remain.

When removing the water tray, it’s important to read the user manual to avoid any damage to the dispenser. Starting with the detachable grill or drip tray will help you access the water tray easily. Take the tray out gently and clean it before placing it back in the dispenser. Overall, by following these simple steps, keeping your Primo water dispenser clean and healthy will be a breeze, and you’ll be able to enjoy refreshing water without any worries.

Further Reading: How to Reset Whirlpool Water Dispenser – A Step-by-Step Guide