Kenmore refrigerators are often preferred by homeowners for their advanced features and durability. One of the popular features of Kenmore refrigerators is the water dispenser that provides chilled or filtered water instantly. However, like any other appliance, the water dispenser on your Kenmore refrigerator may break down or malfunction over time. In such cases, it is important to know how to replace the water dispenser on your Kenmore refrigerator to ensure the continued functionality of your appliance.
This article is a comprehensive step-by-step guide to help you replace the water dispenser on your Kenmore refrigerator quickly and efficiently. Whether you are a DIY enthusiast or a homeowner with little to no experience in appliance repairs, this guide will provide you with all the information required to replace the water dispenser on your Kenmore refrigerator with ease. So, read on to learn the exact steps you need to follow to replace the water dispenser on your Kenmore refrigerator and get your appliance working efficiently once again.
Gather the necessary tools and materials
Replacing the water dispenser on a Kenmore refrigerator can be a challenging task, but it is not impossible. Before you begin, you’ll need to gather the necessary tools and materials. This includes a new water dispenser, a screwdriver, pliers, masking tape, and silicone sealant.
When purchasing a new water dispenser, ensure that it fits your refrigerator model and that it comes with the necessary mounting hardware. You may also need to order a replacement bracket if the original one is damaged. A screwdriver with different sized tips will help you to detach the old dispenser and secure the new one. Pliers are useful for holding and removing small screws and nuts. Masking tape prevents scratches to your refrigerator surface and helps you to mark where to place the new water dispenser. Finally, silicone sealant is necessary for sealing the edges of the dispenser to avoid water leaks.
By gathering the necessary tools and materials, you’ll be well-prepared to replace the water dispenser on your Kenmore refrigerator with ease.
Turn off the water supply and unplug the refrigerator
To replace the water dispenser on your Kenmore refrigerator, the first thing you need to do is turn off the water supply and unplug the refrigerator. This is crucial for your safety and to prevent any water damage or electrical hazards.
Locate the water shut-off valve either under the sink or behind the refrigerator. Turn the valve to the “off” position to stop the water supply. Next, unplug the refrigerator from the electrical socket. This step will help you avoid any risk of electric shock when working on the dispenser unit.
It is essential to wait for a few minutes after turning off the water supply before starting the replacement process. Ensure that all the remaining water in the pipe has drained out entirely. Once you have followed these steps, you can move on to the next step of replacing the water dispenser on your Kenmore refrigerator.
You may also like: Is there a Filter in the Primo Water Dispenser? Exploring the Features and Benefits.
Remove the old water dispenser
Removing the old water dispenser from your Kenmore refrigerator is an important step towards replacing it with a new one. It is essential to ensure that the old dispenser is removed properly and carefully, without causing any damage to the refrigerator or its components.
To remove the old dispenser, you will first need to unplug the refrigerator from the power source to avoid any electrical hazards. Next, locate the dispenser cover or bezel and carefully remove it using a screwdriver. This will give you access to the dispenser mounting screws. Remove the screws, being careful not to drop them, and lift the dispenser assembly out of the refrigerator. You may need to wiggle it a bit to loosen it from its place. Once removed, clean and dry the area around the dispenser to ensure that the new dispenser will fit properly. With the old dispenser removed, you can proceed to install the new one following the steps in the next subheading.
Install the new water dispenser
Once you have removed the old water dispenser, it’s time to install the new one. Before you begin, ensure that you have the right water dispenser that fits your Kenmore refrigerator. Now, follow these simple steps to install the new dispenser.
Firstly, connect the water supply tube to the new dispenser. Be sure to tighten the nut properly, so there are no leaks. Once you have done that, attach the dispenser to the refrigerator door. Use the screws or bolts that come with the dispenser to secure it appropriately. Next, attach the water dispenser actuator to the dispenser. Finally, reattach the drip tray and any other components that you might have removed while replacing the dispenser. Turn on the water supply and test the dispenser by getting a glass of water to ensure there are no leaks or issues. By following these steps, you can quickly and easily replace a water dispenser on your Kenmore refrigerator.
Related Post: Best Cat Food and Water Dispensers: Reviews and Buying Guide
Reconnect the water supply and plug back in the refrigerator
After successfully installing the new water dispenser on your Kenmore refrigerator, it’s time to reconnect the water supply and plug the refrigerator back in. This process is relatively simple and will require you to locate the water supply line that runs to your fridge. Once you’ve located the line, make sure to securely reconnect it to the water inlet valve located on the back of the refrigerator. Be sure to carefully tighten any connections to avoid leaks.
Next, plug your refrigerator back in and turn on the power. Wait a few moments to allow the fridge to power up before testing the newly installed water dispenser. Run water through the dispenser for a few seconds to ensure any air pockets are removed from the line. Your refrigerator is now ready for use and you can enjoy fresh, chilled water whenever you’d like thanks to your newly installed water dispenser.
Test the new water dispenser
Once the new water dispenser is installed, it is important to test it before using it. To test the dispenser, first, plug in the refrigerator and turn on the water supply. Then, press the water lever on the dispenser and hold it for a few seconds. This will flush out any air in the water line and ensure that water is flowing properly.
Next, fill a glass with water from the dispenser and check for any leaks or drips around the dispenser or water line. If any leaks or drips are found, immediately turn off the water supply and tighten any loose connections. Once everything has been checked and confirmed to be working properly, you can safely use your new water dispenser.
Read Also: Best Refrigerator with Internal Water Dispensers: Top Picks for Refreshing Convenience
Troubleshooting any issues with the replacement process.
After completing the replacement process of the water dispenser on your Kenmore refrigerator, it is essential to ensure that it works smoothly. Troubleshooting any problems at this stage can save you the stress of going through the whole process again. The first step is to check for leaks, which could signal that the O-rings or plastic tubing are not tight enough. Tighten them and check again. If the problem persists, check if the water inlet valve is clogged. Unclog it, and if the problem continues, replacing it may be an option.
Another issue you may face during the replacement process is that the dispenser may not dispense water or function properly. If this happens, check that the water filter is correctly installed and functioning correctly. If it is not, replace it. Also, ensure that the water supply is turned on and that the switch on the dispenser is activated. In case none of these steps fix the issue, call a professional to diagnose and solve the problem. Following these troubleshooting tips can ensure that your Kenmore refrigerator’s water dispenser works efficiently and provides you with clean and healthy water.
Final Thoughts
Replacing a water dispenser on a Kenmore refrigerator can be a daunting task. However, with the right tools and precautions, it can be done without any complications. If you are replacing the water dispenser for the first time, make sure you follow the instructions meticulously.
Remember to turn off the refrigerator and start by disconnecting the water supply line. You should also be careful not to damage the other parts of the refrigerator while removing the old dispenser. With the right replacement parts, you can easily get your refrigerator’s water dispenser running again. By following the tips above, you will be able to replace the water dispenser on your Kenmore refrigerator and enjoy fresh, clean water once again.
Further Reading: How Much Does It Cost to Rent a Water Dispenser: A Comprehensive Guide