How to Self Clean a Primo Water Dispenser: A Step-by-Step Guide

A Primo water dispenser is a great investment for anyone who wants fresh and pure water at their fingertips. However, like any other appliance that deals with water, it requires proper cleaning and maintenance to ensure it functions properly. This is where self-cleaning comes into play, a procedure you can do yourself at home without any professional help.

In this article, we will be providing a step-by-step guide on how to self-clean a Primo water dispenser. From gathering the necessary materials to executing the cleaning process, we will be covering all the details to make it easy for you. With this helpful guide, you can enjoy fresh and pure water from your Primo dispenser for years to come.

Quick Summary
To self clean a Primo water dispenser, first, unplug the unit and remove the empty bottle. Mix one tablespoon of bleach with one gallon of water and pour the solution into the dispenser’s reservoir. Reattach the bottle, plug in the unit, and activate the cold water stream. Let the solution flow for approximately five minutes, then stop the flow and unplug the unit. Drain the reservoir and rinse thoroughly with clean water before inserting a new bottle of water.

Gathering the materials you’ll need

When it comes to self-cleaning your Primo water dispenser, gathering the necessary materials should be your first priority. You will need a few basic cleaning supplies that can easily be found at your local store. The first thing you need to set aside is a multi-purpose cleaner. You can either use an all-purpose cleaner, vinegar or bleach to sanitize and clean the dispenser. In case you opt for bleach, make sure it is unscented to avoid interfering with the taste and smell of the water.

The next material you need to have is a scrub or cleaning brush. While a soft sponge could do the trick, a special brush will make cleaning the unit’s different sections much easier. Additionally, you will also need a clean rag or towel to wipe off the excess cleaner and water. These materials, combined with patience, pave the way for a clean, functional dispenser ready to dispense refreshing water.

Disconnecting and draining the Primo Water Dispenser

Before beginning the self-cleaning process of your Primo Water Dispenser, you need to disconnect the dispenser from both the power source and the water supply. Firstly, switch off the power button and unplug the dispenser from the wall outlet. Before you start cleaning, it’s better to let the water dispenser cool down completely to avoid any scalding incidents.

Next, you will need to drain the dispenser of any remaining water. For this step, you need to remove the water bottle from the dispenser and turn the hot and cold water coolers on and off until they dispense no more water. After that, disconnect the water supply by turning the valve at the back of the dispenser anticlockwise. You can then proceed with the cleaning process. Disconnecting and draining your Primo Water Dispenser is crucial to ensure safe and effective cleaning.

You may also like: Why Is My Water Dispenser So Slow? Tips to Improve Its Performance!

Cleaning the outside of the dispenser

Cleaning the outside of your Primo Water Dispenser is as important as cleaning the inside. The dispenser’s exterior is often overlooked, but it can harbor a significant amount of dirt and germs, which can easily spread to users. Therefore, it is advisable to clean the exterior once every two weeks, or more frequently if the dispenser is used heavily.

To clean the outside of the Primo Water Dispenser, begin by unplugging its power cord. Then, use a mild cleaner and a soft cloth to wipe down the dispenser’s surfaces gently. You can also use a disinfectant spray or a solution of vinegar and water to clean and sanitize the exterior. Avoid using abrasive materials, rough sponges, or harsh cleaners that can scratch or damage the dispenser’s surface. Once you’ve wiped down the exterior, dry it off with a clean, dry cloth, and plug the dispenser back in. With these simple steps, you can maintain a clean and hygienic Primo Water Dispenser that looks great and functions well.

Cleaning the internals of the dispenser

Cleaning the internals of a Primo water dispenser is an important aspect of maintaining its longevity and performance. You must clean the dispenser’s internal components at least once every six months to remove any sediment or mineral buildup and prevent bacteria growth.

To clean the internals of the dispenser, first, unplug the dispenser from the power source and remove the water bottle. Drain any remaining water from the dispenser by pressing and holding the water dispensing button. Next, remove the drip tray, and take out the filter cartridge, if your model has one. Now, you can clean the dispenser using a solution of warm water and mild dishwashing soap. Use a soft-bristled brush to scrub the internal components gently, including the reservoir and the spout. Rinse all components thoroughly. Finally, replace the filter cartridge, drip tray, and water bottle, and plug the dispenser back into the power source. Your Primo water dispenser should now be ready for use.

Related Post: How to Disassemble Your Water Dispenser: A Step-by-Step Guide

Preparation of the cleaning solution

To effectively clean your Primo water dispenser, the right cleaning solution is essential. Before proceeding with the cleaning process, you need to prepare the cleaning solution by taking a few simple steps.

First, make sure you have all the necessary ingredients, including white vinegar or lemon juice, warm water, and a small container to mix them in. Next, mix equal parts of white vinegar or lemon juice and warm water in the container. For example, if you use one cup of water, then you will need to use one cup of vinegar or lemon juice. Stir the mixture well until it becomes homogeneous.

It’s important to use white vinegar or lemon juice because they both have acidic properties that can effectively remove any dirt or mineral buildup in the dispenser’s reservoir and water lines. After preparing the cleaning solution, you are now ready to proceed to the next step of cleaning your Primo water dispenser.

Cleaning the dispenser with the cleaning solution

Cleaning the dispenser with the cleaning solution is an essential step to ensure a clean and healthy water supply. To begin, you will need a cleaning solution specifically designed for your Primo water dispenser. These solutions are widely available and can be purchased online or from your local retailer.

Once you have the solution, unplug the dispenser and remove the water bottle. Mix the cleaning solution with warm water according to the instructions provided. Then, use a clean cloth or sponge to apply the solution to the inside of the dispenser, including the reservoir, faucets, and spout. Be sure to cover every nook and cranny and leave the solution in the dispenser for the recommended time. Afterward, rinse the dispenser thoroughly with clean water and allow it to dry completely before reattaching the bottle and plugging in the dispenser. With this simple and effective process, you can ensure a safe and hygienic water supply for you and your family.

Read Also: How to Clean Water Dispenser on Kenmore Elite Refrigerator – A Step-by-Step Guide

Refilling the Primo Water Dispenser with clean water

Refilling the Primo Water Dispenser with clean water is the final step in the self-cleaning process. After flushing out any remaining cleaning solution, it’s important to refill your dispenser with fresh and clean water. This not only ensures that your water is safe to drink, but it also helps to keep your dispenser running smoothly.

To refill your Primo Water Dispenser, begin by plugging it back in and ensuring that all of the parts are securely in place. Then, take your water bottle and carefully pour it into the top of the dispenser. Allow the water to fill up to the appropriate level before replacing the bottle. It’s important to only use clean and fresh water when refilling your dispenser to avoid any potential health hazards. With these simple steps, your Primo Water Dispenser is now free of any harmful bacteria and ready to provide you with clean, refreshing drinking water.

Final Thoughts

Maintaining hygiene is an essential aspect of our daily routine, and cleaning your Primo water dispenser is equally important. If not done correctly, it can lead to harmful bacteria and viruses, compromising your health and safety. By understanding these simple steps and following them religiously, you can keep your dispenser clean and functioning efficiently.

In conclusion, the self-cleaning process is simple and easy to follow. It is recommended to conduct this task every three to four months, at a minimum. Besides that, always keep a check on the water quality and dispense regularly, to prevent any impurities from building up inside the dispenser. By following these set of guidelines, you can ensure that your Primo water dispenser lasts long and provides you with clean and healthy drinking water every time you use it.

Further Reading: How to Fix My Samsung Water Dispenser: Troubleshooting Tips to Get Your Dispenser Running Smoothly

Leave a Comment