How to Clean Your Primo Bottom Loading Water Dispenser: A Step-by-Step Guide

Primo Water is a well-known provider of high-quality water dispensers for both commercial and residential use. Their bottom-loading water dispenser is a popular choice for many households due to its compact design and easy-to-use system. However, like any appliance, it requires regular maintenance and cleaning to ensure it’s functioning efficiently.

In this article, we’ll guide you through a step-by-step process on how to clean your Primo bottom-loading water dispenser. Whether you’re a new owner or a long-time user, this guide will help you keep your dispenser clean and sanitized, so you can enjoy crisp and refreshing water anytime you want. So, let’s get started!

Key Takeaway
To clean a Primo bottom loading water dispenser, first unplug the unit. Remove the empty bottle, drip tray, and baffle. Wash the drip tray and baffle in warm, soapy water. Wipe down the exterior with a damp cloth and mild soap. For the inside of the reservoir, mix 1 tablespoon of bleach with 1 gallon of water and pour it into the reservoir. Let it sit for 5-10 minutes, then drain and rinse with clean water. Replace the drip tray, baffle, and new bottle of water. Plug the unit back in and let it run for a few minutes before use.

The Importance of Regular Cleaning for Your Water Dispenser

Your Primo bottom loading water dispenser provides you with clean and refreshing water every day. However, it is crucial to understand the importance of regular cleaning to maintain the quality and purity of water. Cleaning your water dispenser on a regular basis is essential to keep it free from bacteria, germs, and contaminants that can harm your health.

Neglecting to clean your water dispenser can lead to the formation of harmful bacteria and mineral buildup inside the unit. These contaminants can affect the taste and quality of your drinking water. Regular cleaning not only ensures the purity of water but also extends the life of your water dispenser. By following the step-by-step guide for cleaning your Primo bottom loading water dispenser, you can enjoy clean and safe water for your family and friends.

Gather Your Materials: What You Will Need to Clean Your Primo Water Dispenser

Before you start cleaning your Primo bottom loading water dispenser, make sure you have all the necessary materials at hand. Here’s a checklist of what you will need:

1. White vinegar or Primo cleaning solution – You can either use white vinegar or Primo’s recommended cleaning solution to clean your dispenser.

2. Clean cloth or sponge – You will need a soft cloth or sponge to absorb the cleaning solution and wipe off any residue.

3. Water – You will need water to rinse the dispenser after applying the cleaning solution.

4. Bucket – You can use a bucket to mix the cleaning solution if you are using white vinegar.

5. Pair of gloves – It is recommended to wear gloves while cleaning to protect your hands from any chemicals.

6. Toothbrush – You can use a toothbrush to clean hard-to-reach areas like the nozzle and the drip tray.

Once you have all the materials ready, you can move on to the next step of cleaning your Primo bottom loading water dispenser.

You may also like: How to Clean Your Honeywell Water Dispenser: A Simple Guide

Step One: Disconnecting and Draining Your Primo Water Dispenser

Step One: Disconnecting and Draining Your Primo Water Dispenser

Before beginning the cleaning process, it is essential to disconnect the water dispenser from its power source. In the case of a bottom-loading unit, you will need to unplug the power cord from the wall outlet and remove the bottle from the dispenser’s base. Ensure that the device is unplugged and the hot and cold switches are turned off before proceeding.

Next, you will need to drain all the water from the dispenser’s reservoirs. To do so, position a large container or bucket beneath the spout and release the water. Repeat this process until all the water is drained out. It is advisable to dispose of the water properly to avoid contaminating the environment. With these precautions, you are now ready to proceed to the next step of the cleaning process.

Step Two: Cleaning the Water Tank and Internal Components of Your Primo Water Dispenser

Step Two: Cleaning the Water Tank and Internal Components of Your Primo Water Dispenser

Cleaning the water tank and internal components of your Primo water dispenser is an essential step to ensure it remains in good working condition. The water tank is where the water is stored before dispensing, and if not cleaned regularly, can harbor bacteria, mold and mildew. This can affect the taste and quality of the water being dispensed.

To clean the water tank, first, unplug the dispenser from the power source. Drain any remaining water from the tank and remove any filters or water bottles attached. Mix a solution of mild detergent and warm water and pour it inside the water tank. Scrub the tank with a brush and let the solution sit for about 15 minutes. Rinse the tank thoroughly with clean water and allow it to dry completely before reattaching the dust cover and refilling the tank with water.

Related Post: The 10 Best Bottom Loading Water Dispensers For Home [Updated – 2024]

Step Three: Cleaning the Exterior and Dispensing Area of Your Primo Water Dispenser

After cleaning the inside components of your Primo bottom loading water dispenser, it’s time to tackle the outside. Use a soft cloth or sponge and mild soap solution to wipe down the exterior of the dispenser. Pay attention to the areas that are frequently touched, such as the dispensing spout, buttons, and handles. These areas may become sticky or accumulate residue from frequent use. Be sure to clean these thoroughly to keep your dispenser looking its best.

Next, clean the dispensing area of the water dispenser. Use a clean cloth or sponge and mild soap solution to wipe down the area around the spout and drip tray. Remove the drip tray and wash it separately. Dry thoroughly before reassembling the dispenser. Don’t forget to wipe down the exterior regularly to maintain a clean and hygienic water dispensing experience.

Reassembling Your Primo Water Dispenser: Tips for Proper Reassembly

After completing the cleaning process, it’s time to put your Primo water dispenser back together. Correct reassembly is essential to ensure optimal functionality of your machine. You don’t want to waste your time putting it back together the wrong way or damage any of its parts, rendering it useless.

The first thing you need to do is to place the parts back on their respective positions. Make sure that you reattach all the screws and bolts correctly. Double-check every step and ensure that you don’t miss any parts. Once you reassembled everything, plug your machine and let it run for a few minutes to confirm that it works correctly. Also, wipe the exterior for any water stains or dust. By following these steps, you can ensure that your Primo bottom loading water dispenser runs smoothly, keeping you hydrated.

Read Also: Why Is Water in My Detergent Dispenser? Explained!

Maintenance and Further Tips for Keeping Your Primo Water Dispenser Clean and Running Smoothly.

After cleaning your Primo bottom loading water dispenser, it’s essential to keep it maintained correctly to ensure it continues to run smoothly. Here are some tips for maintaining and preventing problems with your water dispenser.

Firstly, always make sure to keep the water tank full to avoid the water pump from burning out. Secondly, replacing filters every three months is crucial to maintain the water’s cleanliness and prevent any water-consistency issues. Thirdly, periodically check the drip tray for any excess water accumulation and remove it. Lastly, it is recommended to sanitize your water dispenser every six months using a solution of warm water and vinegar. By following these maintenance tips, you can extend the life of your dispenser, ensuring its longevity and keeping it running smoothly for years to come.

Final Verdict

Cleaning a Primo bottom loading water dispenser is essential to ensure the quality and taste of the water dispensed. With the regular cleaning of the dispenser, one can avoid the possibility of bacterial growth, moulds and other impurities. Referencing the manual for cleaning instructions and using vinegar or bleach solution can effectively clean the dispenser. One can also engage in deep cleaning every six months to ensure thorough cleaning of the dispenser.

In conclusion, keeping the Primo bottom loading water dispenser clean is the key to providing quality and safe water for everyone to drink. The process of cleaning is easy and affordable and can be done with everyday household items. Regular maintenance and cleaning of the dispenser will not only prolong its lifespan but also ensure healthy drinking water. By following the cleaning tips and procedures provided, one can have access to clean and refreshing water at any time.

Further Reading: How to Make a Water Dispenser from Cardboard: A DIY Guide

Leave a Comment