How to Clean Primo Water Dispenser for the First Time: A Step-by-Step Guide

A Primo Water Dispenser is a convenient and eco-friendly way of getting clean drinking water right in your home or office. However, like any appliance, it needs to be cleaned from time to time to ensure that it continues to function well and provide safe and refreshing water for consumption. In this article, we’ll walk you through the steps of cleaning your Primo Water Dispenser for the first time.

Cleaning a Primo Water Dispenser might seem like a daunting task, but with the right tools and a little bit of effort, it can be done in no time. Taking care of your water dispenser is important not just for hygiene but also to keep it functioning optimally. So whether you’re a new owner of a Primo Water Dispenser or have had one for a while and never cleaned it, this guide will help you take the first step in maintaining a clean and safe water source for your home or workplace.

Key Takeaway
To clean a Primo water dispenser for the first time, start by unplugging the unit and emptying all the water from the reservoirs. Then, mix a cleaning solution of one tablespoon of bleach per gallon of water and pour it into the reservoirs. Let the solution sit for five minutes before flushing it out with clean water. Finally, wipe down all exterior surfaces with a clean, damp cloth and plug the unit back in to start using it again.

Gather the necessary tools and supplies

Gathering the necessary tools and supplies before cleaning your Primo water dispenser is essential. You will need a few items to make the cleaning process smoother and more effective. First and foremost, you will need a clean, dry cloth or towel to wipe down the exterior and interior of the dispenser. It is important to make sure the cloth is clean to avoid any contaminants from getting inside the unit.

Secondly, you will need a solution to clean the dispenser. You can use a combination of white vinegar and water to clean the dispenser effectively. You will need a jug of white vinegar and some clean water to make the solution. Additionally, you may need a small brush or a toothbrush to scrub any tough stains or buildup. A bucket or large vessel can be used to mix the solution in, and this will help for easy pouring into the dispenser. Once you have gathered all the necessary tools and supplies, it’s time to move on to the next step: preparing your Primo water dispenser for cleaning.

Power down and drain the water dispenser

Once you have gathered the necessary materials and tools for cleaning your Primo water dispenser, the next step is to power it down and drain the water dispenser. Always make sure to turn off the dispenser before you start cleaning. This is a crucial step because it ensures that the dispenser is not powered on when you remove or clean its parts, reducing the chances of electric shock or other hazards.

Once you have turned it off, drain the water dispenser. To do this, unplug the water dispenser from the power source and remove the bottle from the top of the dispenser. Then, locate the nozzle or spout on the front of the dispenser and turn it until you hear a hissing sound. This will release any water that remains in the dispenser and prevent it from spilling as you clean the unit. Remember to dispose of the water appropriately and never reuse it as it may contain impurities.

You may also like: Best Brita Water Dispensers for Clean and Safe Drinking Water

Dismantle and clean each component thoroughly

After unplugging your Primo Water Dispenser, it is important to clean each component thoroughly. Begin by dismantling the water dispenser, starting with the bottle holder, drip tray, and the funnel. Rinse each component with warm water and mild soap, including any removable parts, such as the nozzle.

For the inside of the dispenser, use a brush with soft bristles and a mixture of water and vinegar. Make sure to clean out any debris or sediment buildup from the water pump and reservoir. Once everything is clean, rinse each part again with warm water and dry them with a clean towel.

Before reassembling the dispenser, allow each component to dry completely. Once dry, carefully reattach each part, ensuring a tight fit. Finally, plug the dispenser back in and enjoy fresh, clean water from your newly cleaned Primo Water Dispenser.

Pay special attention to the water reservoir and faucet

The water reservoir and faucet are the most important parts of a water dispenser where germs and bacteria can develop over time. Hence, it is necessary to clean them properly. Firstly, remove the water bottle from the dispenser, and then empty the water reservoir. This can be done by dispensing all the remaining water into a bucket or sink.

Next, detach the faucet from the water dispenser carefully. This step is crucial as it is through the faucet that the water comes into the dispenser. Scrub the faucet with a brush or sponge soaked in a sanitizing cleaner solution. Similarly, clean the water reservoir using a mixture of warm water and vinegar. Scrub the inner lining of the reservoir using a clean brush to eliminate all the bacteria and germs. Rinse the reservoir and faucet thoroughly with clean water and then dry it properly before putting it back into the dispenser.

Related Post: Best Primo Water Dispensers: Find the Perfect Option for Your Needs

Reassemble and refill the dispenser with fresh water

After completing the cleaning process, it’s time to reassemble the Primo water dispenser. Start by reattaching all the removable parts in the exact order in which you removed them. Ensure that all the components are tightly secured before turning on the machine.

Once you have reassembled the dispenser, refill it with fresh water. Make sure to clean the water jug before filling it with water. You can use bottled water or tap water. However, if you use tap water, make sure it is filtered. Also, ensure the water level doesn’t exceed the maximum level indicator. Keep in mind that the first few cups of water may contain cleaning solution residues, so it’s best to discard the initial water before drinking. Following these steps will ensure that your Primo water dispenser remains clean, hygienic, and dispensing fresh, clean water.

Run a few cleaning cycles to ensure proper sanitation

Once you have cleaned all the removable parts of your Primo water dispenser, you need to fill the reservoir with water and run a few cleaning cycles. This will help ensure that no traces of cleaning solution or remaining contaminants are left inside the unit.

To run a cleaning cycle, you can follow the manufacturer’s instructions or use these general steps as a guide. First, turn off the dispenser and unplug it from the power source. Then, add a cleaning solution recommended by the manufacturer to the water reservoir. Next, plug in the dispenser and turn it on. Dispense hot water through the spigot for a few cycles until the reservoir is empty. Finally, refill the reservoir with clean water and run a few more cycles to rinse out any remaining cleaning solution. Once you have completed these steps, your Primo water dispenser should be thoroughly cleaned and ready to use again.

Read Also: Why is My Water Dispenser Overflowing? Tips on How to Troubleshoot the Problem

Maintain your Primo water dispenser for ongoing cleanliness

After you have cleaned your Primo water dispenser for the first time, it is important to maintain its cleanliness to avoid any build-up of contaminants or bacteria. One simple way to keep your dispenser clean is by wiping it down regularly with a damp cloth. This will help remove any dust or debris that may accumulate on its surface.

Another way to maintain your Primo water dispenser’s cleanliness is by changing the water bottle on a regular basis. Old water can become contaminated and affect the quality of the water being dispensed. Additionally, regularly checking and replacing the filter will help ensure that the water stays fresh and clean. Following these simple steps will help ensure that your Primo water dispenser continues to provide you with clean and refreshing water for years to come.

The Conclusion

In conclusion, cleaning your Primo water dispenser for the first time is a quick and simple process. As the dispenser is an essential part of your daily water consumption routine, it is necessary to maintain it properly. Moreover, by keeping your dispenser clean, you can also ensure that your water is safe and healthy to drink.

To summarize the cleaning process, start by unplugging the dispenser and removing the water bottle. Next, clean the exterior with a damp cloth and a mild soap solution. Lastly, sanitize the dispenser’s internal components using a bleach or vinegar solution. By following these easy steps, you can keep your Primo water dispenser clean for months to come.

Further Reading: How to Make a Water Dispenser from Cardboard: A DIY Guide

Leave a Comment