How to choose a PoE switch for your home
Check three things independently: enough powered ports, the right power standard on each port, and enough total power. A large number on the box does not answer all three.
Make a device list first
Write down each camera, access point or other powered device, its quantity, the required PoE standard and its maximum power requirement from the maker's data sheet. Check whether the quoted power is at the device or at the switch: they are different because the cable loses power.
The PoE budget calculator estimates demand from device-side figures. Its optional 10% cable allowance and 20% spare are planning assumptions, not a guarantee for every cable or switch.
Count powered ports, then count all ports
Four cameras and two access points require six suitable PoE ports. You also need somewhere to connect the router or the rest of the network. Check the port diagram: some switches have PoE on only a subset of their ports, and an uplink may use a separate socket or one of the numbered ports.
Match each device to a port
Do not rely on the terms PoE+ or PoE++ alone. Read the supported IEEE standard and the power available to a device. Also check older equipment for passive PoE voltage requirements: a passive injector is not interchangeable with every standard PoE port.
A switch can have enough total watts but still lack a suitable port for one high-power device. Ubiquiti's PoE modes and availability guide distinguishes per-port capability from total power; use the exact model's data sheet before buying.
Leave room without buying blindly
As a worked example, two 16 W access points and four 7 W cameras total 60 W at the devices. With the calculator's 10% allowance that becomes 66 W; keeping 20% of the budget spare calls for at least 82.5 W, rounded up by the calculator to 85 W. That still requires six compatible powered ports and a suitable uplink.
Compare the resulting requirement with the switch's actual total PoE budget, not its power supply rating. Read how it allocates power: a device's reserved power class may matter as well as measured consumption.
Check the details you will live with
Confirm uplink speed, VLAN support if needed, fan noise, mounting, power supply inclusion and local warranty. A fast access point may have a faster Ethernet interface than your existing switch. Decide whether that matters for your usage before paying for faster ports.
We do not yet recommend specific models here. Keep your device list and use it to reject incompatible switches first. Then compare a small shortlist on price and practical fit.