Home Net Guide

Home / Port numbers / Port 546

Port 546: DHCPv6 client

Receiving IPv6 settings and prefixes. Port 546 uses UDP.

Port
546
Commonly used for
DHCPv6 client
Transport
UDP
Encrypted
No
Range
System (well-known) port, 0 to 1023
Our advice
Local network only: never forward it from the internet
IANA registration
dhcpv6-client DHCPv6 Client (TCP, UDP)

Registration: IANA Service Name and Transport Protocol Port Number Registry, retrieved 15 November 2026. The registered name can differ from the everyday use, because popular software often adopts a port without registering it. The description and advice are written by Home Net Guide and describe common practice: any program can be set to use any port.

What port 546 is used for

Port 546 is the client side of DHCPv6. Devices listen on it for IPv6 addresses and settings, and home routers use it on their internet side to receive the block of IPv6 addresses (a delegated prefix) that the provider assigns for the home network.

Should port 546 be open?

A router's firewall must allow DHCPv6 replies in on this port or IPv6 will stop working when the lease expires. That rule is built in on consumer routers. Nothing needs to be forwarded.

Related ports

  • Port 547 (DHCPv6 server): handing out IPv6 addresses and settings
  • Port 68 (DHCP client): receiving an automatically assigned IP address

See all port numbers for the full list and how ports, TCP and UDP work.

Previous: Port 520 (RIP) · Next: Port 547 (DHCPv6 server)