Home Net Guide

Home / Port numbers / Port 68

Port 68: DHCP client

Receiving an automatically assigned IP address. Port 68 uses UDP.

Port
68
Commonly used for
DHCP client
Transport
UDP
Encrypted
No
Range
System (well-known) port, 0 to 1023
Our advice
Local network only: never forward it from the internet
IANA registration
bootpc Bootstrap Protocol Client (TCP, UDP)

Registration: IANA Service Name and Transport Protocol Port Number Registry, retrieved 15 November 2026. The registered name can differ from the everyday use, because popular software often adopts a port without registering it. The description and advice are written by Home Net Guide and describe common practice: any program can be set to use any port.

What port 68 is used for

Port 68 is the client side of DHCP. A device joining a network sends its request from port 68 to port 67 and listens on 68 for the reply carrying its address and settings. The fixed client port exists because the device has no address yet and must be reached by broadcast.

Should port 68 be open?

It is used only on the local network, and on the outside of your router to receive the address your internet provider assigns. There is nothing to open or forward.

Related ports

  • Port 67 (DHCP server): handing out IP addresses automatically
  • Port 546 (DHCPv6 client): receiving IPv6 settings and prefixes

See all port numbers for the full list and how ports, TCP and UDP work.

Previous: Port 67 (DHCP server) · Next: Port 69 (TFTP)