Home Net Guide

Home / Port numbers / Port 67

Port 67: DHCP server

Handing out IP addresses automatically. Port 67 uses UDP.

Port
67
Commonly used for
DHCP server
Transport
UDP
Encrypted
No
Range
System (well-known) port, 0 to 1023
Our advice
Local network only: never forward it from the internet
IANA registration
bootps Bootstrap Protocol Server (TCP, UDP)

Registration: IANA Service Name and Transport Protocol Port Number Registry, retrieved 15 November 2026. The registered name can differ from the everyday use, because popular software often adopts a port without registering it. The description and advice are written by Home Net Guide and describe common practice: any program can be set to use any port.

What port 67 is used for

Port 67 is the server side of DHCP, the protocol that gives a device its IP address, subnet mask, gateway and DNS servers when it joins a network. In a home the router is the DHCP server. The same port is used by BOOTP and by relay agents that pass requests between networks.

Should port 67 be open?

DHCP works by broadcast within the local network, so it is never something to forward. The practical danger is a second, unintended DHCP server on the network, such as a misconfigured router plugged in backwards, handing out wrong settings. Managed switches can block these with a feature called DHCP snooping.

Related ports

  • Port 68 (DHCP client): receiving an automatically assigned IP address
  • Port 547 (DHCPv6 server): handing out IPv6 addresses and settings
  • Port 69 (TFTP): simple file transfer for network booting and firmware
  • Port 53 (DNS): turning names such as example.org into IP addresses

See all port numbers for the full list and how ports, TCP and UDP work.

Previous: Port 53 (DNS) · Next: Port 68 (DHCP client)